自動上料攪拌車傳動系統(system)是怎么工作的？ 混凝土攪拌機的傳動系統在攪拌機的工作中扮演著運送攪拌物料,配合攪拌筒進行攪拌物料等角色,是與攪拌筒、攪拌機配件等同位置不可缺少的 存在,那么這么關鍵（解釋:比喻事物的重要組成部分)是工作部分是靠什么原理來進行各項工作的 呢?

How does the transmission system of automatic feeding mixer work? The drive system of concrete mixer plays the role of transporting mixing materials and mixing materials with the mixing drum in the work of mixer. It is an indispensable existence in the same position as the mixing drum and mixer accessories. So the key is the working part. What principle does the working part rely on to carry out the work?

攪拌機傳動系統(system)的 工作主要由攪拌馬達、傳動V帶等零件帶動的 ,對于攪拌電機來說,我們需要做到的 是:在完成接線工作后應該立刻對其進行防水處理,防止在清洗攪拌筒等區域是,將水淋到攪拌電機上,從而導致(cause)意外的 發生。

The work of mixer drive system is mainly driven by the mixing motor, V-belt and other parts. For the mixing motor, what we need to do is: after completing the wiring work, we should immediately carry out waterproof treatment to prevent the water from pouring into the mixing motor in the area of cleaning the mixing drum, thus causing accidents.

還有一點:在啟動攪拌馬達時,要檢查攪拌筒內是否有物料的 殘留,應將在物料全部后才能啟動。

Another point: when starting the mixing motor, it is necessary to check whether there is any residual material in the mixing drum. It can only be started after all the materials are removed.

對于傳動V帶,我們所需要做的 就是定期調整檢查,特別是在次使用時,要做到每天檢查傳動帶的 松緊狀況。當經過一段時間的 使用出現老化現象之后,我們必須立刻更換,由于傳動帶變形或老化卻不及時更換造成的 后果是嚴重的 ,要引起重視!

For the V-belt, we need to do is regular adjustment and inspection, especially in the secondary use, to do every day to check the tightness of the belt. After a period of use, we have to replace it immediately. The consequence of not replacing the transmission belt in time due to deformation or aging is serious. We should pay attention to it!

攪拌機傳動裝置設計過程中,合理利用了行星齒輪（Gear）傳動的 原理,對傳動裝置中的 齒輪設計進行配齒計算,并對該裝置中的 主要零件進行結構設計。該設計結構簡單緊湊,體積（volume)小,極大地改進了原設計結構的 偏心、體積大的 不好的地方,成本低,且傳動可靠、工藝合理、噪音低,得到用戶的 認可。

In the design process of mixer transmission device, the principle of planetary gear transmission is reasonably used to calculate the gear matching in the transmission device, and the structure of the main parts of the device is designed. The design is simple and compact in structure, small in volume, which greatly improves the eccentricity of the original design structure and the bad place of large volume, with low cost, reliable transmission, reasonable process and low noise, which is recognized by users.