Fully automatic mixer is widely used in construction sites. In some cases, the cooling system may fail. Let's analyze it for you.

液壓油冷卻系統通常由四個部分組成，但是容易發生故障的是保護整個回路保險。

The hydraulic oil cooling system is usually composed of four parts, but the fault prone is to protect the whole circuit.

小型混凝土運輸攪拌罐的操作是通過液壓傳動裝置進行的。液壓油長時間以恒定速度流過管道，摩擦管道壁并增加管道和油泵各個閥組件的阻力。操作完成后，液壓油被壓縮，液壓油產生熱量，并且油溫升高。

The operation of small concrete transportation mixing tank is carried out through hydraulic transmission device. Hydraulic oil flows through the pipeline at a constant speed for a long time, rubbing the pipeline wall and increasing the resistance of each valve component of the pipeline and oil pump. After the operation is completed, the hydraulic oil is compressed, the hydraulic oil generates heat and the oil temperature rises.

全自動攪拌車中的液壓油正常工作。保持恒溫是一件好事。但是，超過溫度范圍，不僅會使整個工作系統不穩定，而且還會損壞密封件并增加液壓油的氧化劣化。

The hydraulic oil in the automatic mixer works normally. Keeping the temperature constant is a good thing. However, exceeding the temperature range will not only make the whole working system unstable, but also damage the seals and increase the oxidative degradation of hydraulic oil.

全自動攪拌車對于冷卻系統故障了解就是這些，你明白了嗎？

That's what the automatic mixer knows about the failure of the cooling system. Do you understand?