自動上料攪拌車主要用于混凝土的制造和運輸，實用性非常的強，它的使用范圍也是越來越廣泛，自然受到市場的歡迎。那么自動上料攪拌車作業時的性如何？

　　Automatic feeding mixer is mainly used in the manufacture and transportation of concrete, practical is very strong, its use is more and more widely, naturally welcomed by the market. So how professional is the operation of automatic feeding mixer?

　　在運輸過程中，自動上料攪拌車的攪拌筒的轉速須控制在每分鐘左右的低速。攪拌筒中的葉片用于連續轉動和攪拌混凝土，以防止靜電引起的離析或硬化，確保運現場的混凝土質量。

　　In the process of transportation, the speed of the mixing barrel of the automatic feeding mixer must be controlled at a low speed of about per minute. Blades in the mixing cylinder are used for continuous rotation and mixing of concrete to prevent segregation or hardening caused by static electricity and to ensure the quality of concrete delivered to the site.

　　雖然運輸距離增加了，但距離和時間不能太長，也不能超過混凝土的凝結時間。時間仍然受到混凝土質量和環境等因素的限制。嚴格來說，在不同的季節和時間，運輸時間不同。

　　Although the transportation distance is increased, the distance and time should not be too long or exceed the setting time of concrete. Time is still limited by factors such as the quality of concrete and the environment. Strictly speaking, in different seasons and times, transport time is different.

　　另外，混合料不是成品混凝土，而是半成品。因此，攪拌筒在運輸過程中的攪拌速度比預拌材料快得多。一般情況下，根據混凝土混合料的配制比例，速度控制在每分鐘8到10轉之間。為了節省時間，也可以在運輸過程中將混合料攪拌到成品混凝土中，這需要添加相應的設備，如水箱。

　　In addition, the mixture is not finished concrete, but semi-finished. As a result, the drum is stirred much faster during transportation than the ready-mixed material. Under normal circumstances, the speed is controlled between 8 and 10 revolutions per minute, depending on the proportion of concrete mixture. To save time, the mixture can also be mixed into the finished concrete during transportation, requiring the addition of equipment such as water tanks.

　　這種運輸過程中的攪拌可以增加運輸距離，延長混凝土凝結時間。雖然為了增加運輸距離和延長運輸時間，在運輸過程中將混合物混合到成品中可以節省固定投資，提高相對生產率，但對于長途運輸來說，它是一個不錯的選擇！

　　The mixing in the transportation process can increase the transportation distance and prolong the concrete setting time. Although mixing the mixture into the finished product during transport can save fixed investment and improve relative productivity in order to increase transport distance and time, it is a good choice for long-distance transport!

　　然而，這種方法的缺點也很明顯。很難獲得的成品混凝土，這主要是由于設備的限制，對于要求嚴格的施工，盡量使用預拌混凝土的攪拌運輸。

　　However, the disadvantages of this approach are also obvious. It is difficult to obtain high-quality finished concrete, which is mainly due to the limitation of equipment, for strict construction requirements, try to use the mixing transportation of ready-mixed concrete.

　　自動上料攪拌車作業時的性如何？從以上的內容中我們可以看出，該攪拌車在作業時的性還是非常不錯的，值得選擇！那么更多內容就來網站kitchinit.com看看吧！

　　How professional is the operation of automatic feeding mixer? From the above content, we can see that the mixing truck is very good in the professional operation, it is worth choosing! Then come to kitchinit.com for more content!