自動攪拌車在建筑工程上使用較多，對攪拌車了解不深的，對攪拌車的組成可能就是底盤和罐子，但是如果你想購買攪拌車，那就要對攪拌車多做了解，以方便選購，今天小編就給大家普及一下自動攪拌車各部件的基本內容。

Automatic mixers are widely used in construction projects, but they don't know much about mixers. The composition of mixers may be chassis and tanks. However, if you want to buy mixers, you need to know more about mixers to facilitate purchase. Today's mini series will give you a general introduction to the basic contents of various parts of automatic mixers.

攪拌筒是整個三輪底盤攪拌車的關鍵部件，作為存儲混凝土的容器，對防止其固化、離析起著決定性的作用。它由拌筒體、托輪等組成。筒體由前錐段、后錐段、圓柱段、封頭、葉片、進料小錐、滾道等組焊而成,前端與減速機連接在一起，后部通過托輪支撐在副車架上。

The mixing drum is the key part of the whole three wheel chassis mixer truck. As a container for storing concrete, it plays a decisive role in preventing its solidification and segregation. It is composed of mixing barrel, supporting wheel, etc. The cylinder is composed of front cone section, rear cone section, cylinder section, head, blade, feed cone, raceway, etc. by assembly and welding. The front end is connected with the reducer, and the rear is supported on the subframe through the supporting wheel.

托輪起支撐滾筒體的作用，由支座、軸承座、軸、軸承等組成。攪拌筒的殼體及葉片都由高強度鋼板制作而成，具有更高的耐磨性。經過優化設計的攪拌筒，還具有可靠的結構剛度，良好的耐磨性能，流暢地進出料，低的殘留量，既可攪拌混凝土，又可攪動輸送預拌混凝土，決無出料離析現象，保障了混凝土的勻質性能。

The supporting roller plays the role of supporting the roller body and is composed of a support, a bearing seat, a shaft, a bearing, etc. The shell and blades of the mixing drum are made of high-strength steel plates, which have higher wear resistance. The optimized mixing drum also has reliable structural stiffness, good wear resistance, smooth feeding and discharging, and low residue, which can not only mix concrete, but also stir and transport ready mixed concrete without segregation, ensuring the homogeneity of concrete.

進出料裝置由進料斗、出料斗、主卸料槽、副卸料槽、支架、鎖緊架等組成，是三輪底盤攪拌車的重要組成部分，直接影響到進出料的速度和質量,進、出料斗通過支架和副車架的后臺支撐架相連。

The feeding and discharging device is composed of a feeding hopper, a discharging hopper, a main discharging chute, a auxiliary discharging chute, a bracket, a locking frame, etc. It is an important part of a three wheel chassis mixer, which directly affects the speed and quality of feeding and discharging. The feeding and discharging hoppers are connected with the background support frame of the auxiliary frame through the bracket.

操縱系統：主要由控制器、聯動軸、軟軸及連桿機構組成，主要控制攪拌罐的轉速及旋轉方向。

Operating system: mainly composed of controller, linkage shaft, flexible shaft and linkage mechanism, which mainly controls the speed and direction of rotation of the mixing tank.

托輪系統：攪拌罐后部與副車架連接的部位，主要起支撐罐體的作用。

Supporting wheel system: the part at the rear of the mixing tank connected with the subframe, which is mainly used to support the tank body.

進料系統：主要是由進料斗與支架組成，進料斗由于沖擊磨損較大，材料要求耐磨性好，支架主要起到減輕沖擊力的作用。

Feeding system: It is mainly composed of a feeding hopper and a support. Due to the large impact wear of the feeding hopper, the material is required to have good wear resistance. The support is mainly used to reduce the impact force.

電路系統：主要控制整車的電路，比如尾燈，側標志燈、示廓燈、冷卻風扇電機等。

Circuit system: mainly controls the circuit of the whole vehicle, such as tail lamp, side marker lamp, position lamp, cooling fan motor, etc.

對于自動攪拌車各部件的基本認識就到這里了，您要注意平常使用時要定期對其進行維護保養，延長它的使用壽命。更多注意事項就來我們網站http://kitchinit.com看看吧。

That's all for the basic understanding of the components of the automatic mixer. You should pay attention to the regular maintenance of the automatic mixer during normal use to extend its service life. More notes on our website http://kitchinit.com Take a look.