結合攪押車的結構、工作原理以及對攪撲車操作的特殊要求，攪押車無線控制系統功能要求實現除齊通自動攪拌車行駛系統外的所打操作功能。下面來講講自動攪拌車本身的無線控制要求是怎樣的。

Combined with the structure, working principle and special requirements for the operation of the agitator and escort truck, the function of the wireless control system of the agitator and escort truck is required to realize the operation function of the agitator and escort truck except for the running system of the automatic agitator truck. Now let's talk about the wireless control requirements of the automatic mixer truck itself.

該功能是自動攪拌車無線控制系統中智能操作部分，主要用于操作者通過預先記錄搜拌筒的運轉狀態，在需要的時候再通過讀取記憶并進行一一鍵到位操作。

This function is the intelligent operation part of the wireless control system of the automatic mixer truck, which is mainly used for the operator to record the running state of the mixing drum in advance, read the memory and perform one by one operation when necessary.

該功能的實現要求無線控制系統具有一定的記憶存儲功能，當啟動無線遙控器的記憶按鈕時，控制器根據既定程序對當前攪拌筒運行狀態（主要是速度）進行記錄。

The realization of this function requires that the wireless control system has a certain memory storage function. When the memory button of the wireless remote controller is activated, the controller records the current operation state (mainly the speed) of the mixing drum according to the established program.

當啟動恒速智能操作時，控制器提取存儲信息并自動將自動攪拌車狀態調節記憶狀態?？紤]到系統開發的成本以及實際需求，恒速控制只允許對操作執行一次記憶操作，當第二次按下記憶鍵后，次存儲信息將被覆蓋。

When the constant speed intelligent operation is started, the controller extracts the stored information and automatically adjusts the state of the automatic mixer to the memory state. Considering the cost of system development and the actual demand, the constant speed control allows only one memory operation for the operation. When the memory key is pressed for the second time, the secondary memory information will be overwritten.

此外自動攪拌車作業過程中，將會(huì )遇到需要緊急制動的情況，比如機械故障，或者施工過程中的突發情況等，因此在自動攪拌車無線控制系統的設計過程中，因對導致需要對自動攪拌車進行緊急制動的因素進行統計。

In addition, during the operation of the automatic mixer, emergency braking will be required, such as mechanical failure, or emergencies during construction. Therefore, during the design of the wireless control system of the automatic mixer, comprehensive statistics will be made on the factors that cause the need for emergency braking of the automatic mixer.

并對每個因素進行定性和定量研究，當該因素超過允許值時，系統通過傳感器獲取信息在按照既定程序啟動緊急制動操作。更多相關事項就來我們網站http://kitchinit.com咨詢吧！

Qualitative and quantitative research shall be carried out for each factor. When the factor exceeds the allowable value, the system will acquire information through sensors and start emergency braking operation according to the established procedure. Come to our website for more information http://kitchinit.com Consult!