In the construction site, the 4-party automatic feeding mixer is usually used, but the phenomenon of heat dissipation system failure may also occur. Next, let's analyze it.

液壓油散熱系統通常由四個部分組成，但是容易受到傷害的是保護整個回路的保險，因此，駕駛混凝土攪拌車的朋友遇到此類問題時請先檢查，然后再對其他零件進行故障排除，檢查保險是否正常。

The hydraulic oil cooling system is usually composed of four parts, but the most vulnerable part is the insurance to protect the whole circuit. Therefore, when a friend driving a concrete mixer encounters such problems, please check first, and then troubleshoot other parts to check whether the insurance is normal.

4方自動上料攪拌車的罐體由液壓傳動裝置操作。液壓油長時間以恒定速度在管道中流動，除了與管道壁發生摩擦外，它還增加了管道中各種閥門和油泵的阻力。升高油溫。

The tank of 4-square automatic feeding mixer is operated by hydraulic transmission device. Hydraulic oil flows in the pipeline at a constant speed for a long time. In addition to friction with the pipe wall, it also increases the resistance of various valves and oil pumps in the pipeline. Increase the oil temperature.

攪拌車中的液壓油正常工作是一件好事。保持恒定溫度是很好的，但是如果溫度超過溫度范圍，不僅整個操作系統將變得不穩定，而且密封件將被損壞，并且液壓油會氧化并變質。

It is a good thing that the hydraulic oil in the mixer works normally. It is good to keep a constant temperature, but if the temperature exceeds the temperature range, not only will the whole operating system become unstable, but also the seals will be damaged, and the hydraulic oil will be oxidized and deteriorated.

4方自動上料攪拌車散熱系統的故障分析，歡迎來電咨詢！

4-party automatic feeding mixer cooling system fault analysis, welcome to inquire!