RM新时代入口

歡迎來到中科聚峰機械有限公司!

24小時服務熱線:

400-879-1999

點擊撥打服務熱線:400-879-1999
當前位置:首頁>新聞中心>行業新聞如何避免自上料攪拌車高溫危害

如何避免自上料攪拌車高溫危害

來源:http://kitchinit.com/ 日期:2021-03-06 發布人:admin
概述:高溫環境對自上料攪拌車是有很大危害的,如何避免自上料攪拌車高溫危害呢?小編總結了以下4點:
高溫環境對自上料攪拌車是有很大危害的,如何避免自上料攪拌車高溫危害呢?小編總結了以下4點:
High temperature environment has great harm to the self feeding mixer. How to avoid the high temperature harm of the self feeding mixer? The following four points are summarized
1、防止車漆受損:車漆經過強烈的陽光曝曬,很容易出現發舊、起皺的情況,而普通的美容打蠟雖然可以起到一定的防曬效果,但由于任何車蠟都含有矽的成分,紫外線照射時間長了會銹蝕車漆,留下點點黑斑。車蠟本身起不到增強硬度、抗紫外線的作用,反而會因溫度過高而很快流失,停車時要注意盡量把車停放在陰涼處。
1. Prevent damage to car paint: car paint after strong sunlight exposure, it is easy to appear old, wrinkled situation, and ordinary beauty waxing although can play a certain sunscreen effect, but because any car wax contains silicon components, UV irradiation for a long time will rust car paint, leaving a little black spots. The car wax itself can not enhance the hardness and anti ultraviolet effect, but it will be quickly lost due to the high temperature. When parking, pay attention to park the car in a cool place as far as possible.
2、防止發動機機體過熱:由于環境溫度比較高,因此發動機很容易過熱,要加強對發動機冷卻系統的檢查、保養,這包括節溫器、水箱、水泵、風扇等部件的檢查,并且要注意及時加注冷卻水。當水溫超過100℃時,應在陰涼處停車降溫,讓發動機怠速運轉,并掀開發動機罩幫助散熱。
2. To prevent the engine body from overheating: due to the high ambient temperature, the engine is easy to overheat. It is necessary to strengthen the inspection and maintenance of the engine cooling system, including the inspection of thermostat, water tank, water pump, fan and other components, and pay attention to the timely filling of cooling water. When the water temperature exceeds 100 ℃, stop in the shade to cool down, let the engine idle, and lift the hood to help heat dissipation.
3、防止剎車制動失靈:制動液在高溫環境中很容易發生蒸發汽化,在制動管路中形成氣阻,制動蹄片也容易燒蝕,造成制動失靈。所以要經常檢查調整制動系統,下長坡途中應注意停車晾剎,保證制動性能的良好。如果發現制動轂發燙,應停車降溫,但不可澆潑冷水,以防制動轂破裂。
3. Prevent the brake failure: the brake fluid is easy to vaporize in the high temperature environment, forming air resistance in the brake pipeline, and the brake shoes are easy to be ablated, resulting in brake failure. Therefore, the braking system should be checked and adjusted frequently, and attention should be paid to parking and air braking on the way down the long slope to ensure good braking performance. If it is found that the brake hub is hot, stop the vehicle to cool down, but do not pour cold water to prevent the brake hub from cracking.
4、防止車胎爆裂:氣溫高的時候比較容易爆胎,溫度過高時很容易使輪胎變形,抗拉力下降。而作為輪胎本身,氣壓不標準、性能減弱、輪胎老化,或者在行駛過程中輪胎軋到了堅硬的金屬或其他硬物等情況,都會導致汽車突然間爆胎。
4. Prevent tire burst: when the temperature is high, it is easy to burst the tire. When the temperature is too high, it is easy to deform the tire and reduce the tensile strength. As the tire itself, non-standard air pressure, poor performance, tire aging, or hard metal or other hard objects rolled by the tire in the process of driving will lead to sudden tire burst.

截屏,微信識別二維碼

RM新时代入口