The structure of automatic feeding mixer is simple and easy to operate, but there are also many small problems in the operation, such as not discharging. Although it is a small problem, we should find the reason and solve it thoroughly.

自動上料攪拌車在正常情況下，攪拌時間到零后攪拌機會自動卸料，但是在生產過程中按下了操作臺上的暫停按鈕后到了攪拌時間，攪拌機沒有卸料。這時候要先檢查自動上料攪拌車的卸料門上的電磁閥，看電磁閥是否損壞，電磁閥損壞了卸料門就會打不開，攪拌機自然不會卸料，需要對電磁閥進行檢修。

Under normal conditions, the mixer will discharge automatically when the mixing time reaches zero. However, when the pause button on the operation platform is pressed in the production process, the mixer will not discharge when the mixing time is reached. At this time, first check the solenoid valve on the discharge door of the automatic feeding mixer to see if the solenoid valve is damaged. If the solenoid valve is damaged, the discharge door will not open, and the mixer will not discharge naturally, so the solenoid valve needs to be overhauled.

若不是電磁閥的故障時就需要檢查操作臺上的暫停按鈕是否按下，若沒有按下就按下。若操作臺上的按鈕也沒有問題就需要檢查計算機的監控界面，看監控界面上的禁止出料控制是否被，若被立即取消。若以上都沒有問題就是混凝土攪拌機壞掉了，就需要對攪拌機進行檢查。

If it is not the fault of the solenoid valve, you need to check whether the pause button on the console is pressed. If not, press it. If there is no problem with the button on the console, you need to check the monitoring interface of the computer to see if the no discharge control on the monitoring interface is activated. If it is activated, it will be cancelled immediately. If there is no problem above, the concrete mixer is broken, so we need to check the mixer.

以上是自動上料攪拌車不卸料時常規的檢查方法，如需了解更多，請點擊下方二維碼，關注自動上料攪拌車設備！

The above is the conventional inspection method when the automatic feeding mixer does not unload. For more information, please click the QR code below to pay attention to the experts of automatic feeding mixer!