Mixer truck and other concrete machinery will inevitably have some faults in the long-term use process. At this time, we need to clean the mechanical soil slag. So let's take a closer look at how to clean up the soil properly.

1、準備應急驅動軟管，關閉攪拌車，然后拆下液壓馬達上的高壓油管接頭。

1. Prepare the emergency drive hose, turn off the mixer, and then remove the high pressure oil pipe connector on the hydraulic motor.

2、救援車關閉，液壓馬達的高壓油管被拆除，故障車輛上的相應連接器與應急驅動軟管連接。

2. The rescue vehicle was closed, the high-pressure oil pipe of the hydraulic motor was removed, and the corresponding connector on the faulty vehicle was connected with the emergency drive hose.

攪拌一體車

Mixer truck

3、啟動救援車并將其手柄轉到卸貨位置。故障車輛內的混凝土排出。

3. Start the rescue vehicle and turn its handle to the unloading position. The concrete in the faulty vehicle is discharged.

4、緊急驅動完成后，拆下驅動軟管并恢復兩輛車的原始狀態(tài)。

4. After the emergency drive is completed, remove the drive hose and restore the original state of the two vehicles.

5、在滾輪和滾道之間放置一個木質楔子，以控制攪拌車的旋轉。一定要注意安全。關閉發(fā)動機并拆下液壓馬達的高壓油管。攪拌車可以自由旋轉。

5. A wooden wedge is placed between the roller and the raceway to control the rotation of the mixer. We must pay attention to safety. Shut off the engine and remove the high pressure oil line from the hydraulic motor. The mixer can rotate freely.

6、控制攪拌筒的旋轉，將維護孔轉到下部，然后打開維護孔清理缸內的混凝土。這時，一定要注意安全?；炷列读虾螅謴驮瓉淼娜詣右惑w式攪拌車。

6. Control the rotation of the mixing drum, turn the maintenance hole to the lower part, and then open the maintenance hole to clean the concrete in the cylinder. At this time, we must pay attention to safety. After concrete unloading, the original full-automatic integrated mixer is restored.