Many types of lamps are used in the automatic charging mixer. The most commonly used models are halogen and vacuum lamps. However, the service life is not very long. Therefore, in the use of light bulbs, should pay attention to the maintenance of the bulb.

1.有必要合理了解照明的不同功能，并全面維護自動上料攪拌車照明。這些燈主要包括轉向信號燈，牌照燈，車寬燈，停車燈，倒車燈和制動器。

1. It is necessary to reasonably understand the different functions of lighting and comprehensively maintain the lighting of automatic feeding mixer. These lights mainly include turn signal lights, license plate lights, width lights, stop lights, reverse lights and brakes.

2.燈泡的特殊位置應給予特殊保護。自動上料攪拌車應使用霧燈作為標準設備或常用選件。霧燈通常安裝在自動上料攪拌車的下部，因此很容易損壞，所以當出現裂紋時，應及時更換。

2. Special protection shall be given to the special position of the bulb. Automatic loading mixer should use fog lamp as standard equipment or common option. Fog lamp is usually installed in the lower part of the automatic feeding mixer, so it is easy to be damaged, so when cracks appear, it should be replaced in time.

3.燈罩由特殊材料制成，具有良好的密封性能。然而，如果經常摩擦，則透光率容易劣化并且光的亮度變暗。因此，定期擦洗燈罩有助于提高燈的性能。

3. The lampshade is made of special material and has good sealing performance. However, if friction is frequent, the light transmittance is easy to deteriorate and the brightness of the light will be dimmed. Therefore, regular scrubbing of the lampshade helps to improve the performance of the lamp.

自動上料攪拌車的車燈維修情況介紹就是這些，希望對你有幫助。

This is the introduction of lamp maintenance of automatic feeding mixer. I hope it will help you.