Most of the mixing operation of the automatic feeding mixer is mechanical mixing. The mixing equipment of medium and low pressure vertical steel vessels is mainly used to understand the problems of the mixer

緊急驅動完畢后,將驅動軟管卸下,并恢復兩車原狀。將自上料混凝土攪拌車熄火,將其液壓馬達的高壓油管卸下,并與故障車上的對應接頭用緊急驅動軟管相在托輪和滾道之間放入木楔,以控制攪拌筒的旋轉。

After the emergency drive, remove the drive hose and restore the original state of the two vehicles. Turn off the self loading concrete mixer, remove the high-pressure oil pipe of its hydraulic motor, and put a wooden wedge between the supporting wheel and the raceway to control the rotation of the mixing drum.

自動上料攪拌車

Automatic feeding mixer

一定要注意;將發動機熄火，拆松液壓馬達的一根高壓油管,攪拌筒可自由旋轉，控制攪拌筒的旋轉,使維修孔轉到下部,然后打開維修孔，清理出筒內混凝土,此時一定要注意,混凝土排出完畢后，恢復攪拌車原狀。發動攪拌車,將其操縱手柄撥出料位置,故障車內的混凝土即被排出。 準備好緊急驅動軟管,將攪拌車熄火,卸下液壓馬達上的高壓油管接頭。

Be sure to pay attention to safety; turn off the engine and loosen a high-pressure oil pipe of the hydraulic motor. The mixing cylinder can rotate freely, control the rotation of the mixing cylinder, make the maintenance hole turn to the lower part, and then open the maintenance hole to clean out the concrete in the cylinder. At this time, pay attention to safety. After the concrete is discharged, restore the mixer truck to its original state. Start the mixer, turn its control handle to the discharging position, and the concrete in the fault truck will be discharged. Prepare the emergency drive hose, turn off the mixer, and remove the high-pressure oil pipe connector on the hydraulic motor.

本公司主要是從事工程建筑機械行業，主要就是做攪拌機的，在質量上盡可放心，集研發銷售為一體，歡迎各位來廠咨詢。

The company is mainly engaged in the construction machinery industry, mainly to do blenders, in the quality can be assured, set R & D sales as one, welcome to the factory consultation.