During the driving of the vehicle, we may encounter scratch and collision, which may cause the paint to fall off. Today we will talk about whether the paint of the feeding mixer needs to be protected.

1、盡量把攪拌機停放在車庫里，停車的時候不要有強陽光暴曬，減少雨淋。

1. Park the mixer in the garage as far as possible. Don't expose to strong sunlight when parking to reduce the rain.

2、外出停車的時候不要亂停亂放，如果擋路礙事會招人劃車漆。

2. Don't park when you go out. If you get in the way, you'll get scratched.

3、攪拌機剛買回來的時候要封一次釉，以后少拋光多打蠟。

3. When the blender is just bought back, it needs to seal the glaze once, and then polish less and wax more.

4、擦攪拌機不要干擦，上面的小沙勵可能會磨損漆面，一定要水沖洗。

4. Don't dry wipe the blender. The small sand on it may wear the paint surface. Be sure to wash it with water.

上料攪拌車的動力由二類底盤全功率取力器輸出通過傳動軸把動力傳給液壓泵，液壓泵產生液壓能通過油管傳到液壓馬達。

The power of the feeding mixer is output by the second class chassis full power take-off, and the power is transmitted to the hydraulic pump through the transmission shaft. The hydraulic pressure generated by the hydraulic pump can be transmitted to the hydraulic motor through the oil pipe.

液壓馬達把液壓能轉化為動能并通過減速機減速增扭傳遞到攪拌罐，通過調節（雙作用變量）液壓泵的伺服手柄角度達到調節攪拌罐正反轉和轉速的大小，以及完成砼裝料、攪拌、攪動、出料等作業的目的。

The hydraulic motor converts the hydraulic energy into kinetic energy and transmits it to the mixing tank by decelerating and increasing the torque through the reducer. By adjusting the angle of the servo handle of the hydraulic pump (double acting variable), the positive and negative rotation and rotation speed of the mixing tank can be adjusted, and the concrete loading, mixing, stirring, discharging and other operations can be completed.