1. After unloading at the construction site, immediately clean the feed hopper, discharge hopper and discharge chute with hoses connected to the mixer truck to remove sludge and concrete attached to the main body. On the way back to the mixing plant, 150-200l of water shall be poured into the mixing drum to clean the concrete residue on the walls and blades.

2.每天工作后，駕駛員需要將清水倒入攪拌桶中，以高速（14-18rpm）旋轉5-10分鐘，然后排干水以確保滾筒清潔。用高壓水清潔攪拌桶的所有零件時，請小心避免接觸儀表和操縱桿等零件。壓力水噴嘴與主體噴漆表面之間的距離必須為40cm以上。

2. After working every day, the driver needs to pour clean water into the mixing drum, rotate at high speed (14-18rpm) for 5-10 minutes, and then drain the water to ensure that the drum is clean. When cleaning all parts of the mixing drum with high-pressure water, please be careful to avoid touching the instrument, control lever and other parts. The distance between the pressure water nozzle and the painted surface of the main body must be more than 40cm.

3.清潔攪拌桶內外的污垢和殘留的混凝土爐渣時，以及技工進入攪拌桶并進行自動加料攪拌時，以及自動加料攪拌機運行時，小汽車時，請注意以下事項：關閉引擎。完全停止攪拌桶。當技工在鋼瓶中工作時，請確保混合鋼瓶通風良好，空氣新鮮，沒有氣體或有害粉塵，并且氧氣供應充足。在桶中使用電動工具時，操作員必須具有良好的絕緣保護。

3. Please pay attention to the following items when cleaning the dirt and residual concrete slag inside and outside the mixing drum, when the mechanic enters the mixing drum and carries out automatic feeding and mixing, when the automatic feeding mixer is running and when driving a car: first turn off the engine. Stop the mixing drum completely. When the mechanic works in the cylinder, please ensure that the mixed cylinder is well ventilated, the air is fresh, there is no gas or harmful dust, and the oxygen supply is sufficient. When using electric tools in barrels, the operator must have good insulation protection.

4.工作時請勿觸摸旋轉的攪拌桶。為防止事故發生，請勿觸摸主卸料斜槽和加長卸料斜槽之間的連接。

4. Do not touch the rotating mixing drum during operation. To prevent accidents, do not touch the connection between the main discharge chute and the extended discharge chute.