The tank body is made of 6mm alloy steel manganese steel, which has higher strength and more wear-resistant blades

流水線生產，攪拌筒整體拼焊工裝設備保證產品質量，全自動環縫，縱縫，這些都是小廠無法比擬的。

Assembly line production, overall assembly of mixing drum, welder assembly equipment to ensure product quality, full-automatic circumferential seam and longitudinal seam, which are unmatched by small factories.

罐體封頭采用自動旋邊機旋邊，內外對接滿焊，并加厚達到8mm。

The tank head adopts automatic edging machine for edging. The internal and external butt joints are fully welded and thickened to 8mm.

液壓系統采用德國力士樂液壓泵，榮驕減速機;薩利液壓泵，液壓馬達，意大利PMP擺線針輪減速機，原裝進口，非貼牌產品。

The hydraulic system adopts German Rexroth hydraulic pump and rongjiao reducer; Sali hydraulic pump, hydraulic motor, Italian PMP cycloid pinwheel reducer, imported with original packaging, non OEM products.

內部葉片采用5mm細晶粒合金鋼，采用UG和CAD計算機仿真技術設計成型，由技術人員結合規定，融合的風格重新設計，角度合理，攪拌更加均勻，卸料殘存率更低，改進了傳統攪拌過程中易出現的石子與水泥混合不均勻與葉片易磨損的現狀;進料速度;3.8方/分，出料速度;3方/分鐘，殘留率<0.2%。

The internal blade is made of 5mm fine grain alloy steel, which is designed and formed by UG and CAD computer simulation technology. It is redesigned by technicians in combination with national regulations and integrated style, with reasonable angle, more uniform mixing and lower discharge residue rate, which improves the current situation of uneven mixing of stones and cement and easy wear of blades in the traditional mixing process; Feed speed; 3.8m3/min, discharge speed; 3m3 / min, residue rate & lt; 0.2%。

水泥攪拌車設計特點：

Design features of cement mixer truck:

低傾角設計：較同類攪拌車傾角低5%，系數高10%;進料口出料口設計合理，進出料速度快，操作簡單

Low inclination design: the inclination is 5% lower and the safety factor is 10% higher than that of similar mixers; The design of the inlet and outlet is reasonable, the feeding and discharging speed is fast, and the operation is simple

攪拌筒：所采用的攪拌筒形式是一種應用較為普遍的結構形式，攪拌葉片采用三維雙螺旋攪拌設計殘余率低0.6%，優于國際標準2%，行業標準0.7%-1%。

Mixing drum: the adopted mixing drum is a widely used structural form. The mixing blade adopts three-dimensional double spiral mixing design, and the residual rate is as low as 0.6%, which is better than 2% of the international standard and 0.7% - 1% of the leading industry standard.

傳動系統：拌筒的驅動方式為以發動機為動力源，由發動機后端的取力器取力，通過傳動軸傳遞到液壓泵，經馬達減速機帶動攪拌筒轉動

Transmission system: the driving mode of the mixing drum is to take the engine as the power source, take the power from the power take-off at the rear end of the engine, transmit it to the hydraulic pump through the transmission shaft, and drive the mixing drum to rotate through the motor reducer

操縱系統：操縱系統通過汽車尾部的左右兩個操縱桿來控制攪拌筒的正反轉和轉速，從而來完成進出料以及攪拌動作

Control system: the control system controls the forward and reverse rotation and rotation speed of the mixing drum through the left and right control levers at the rear of the car, so as to complete the feeding and discharging and mixing actions

供水系統：攪拌車的供水系統主要用來清洗攪拌罐及其外表，供水系統主要是壓力水罐供水，水壓可達壓力0.6-0.8Mpa。

Water supply system: the water supply system of the mixer truck is mainly used to clean the mixing tank and its surface. The water supply system is mainly supplied by the pressure water tank, and the water pressure can reach 0.6-0.8mpa.

自動上料攪拌車專注為您提供新鮮的行業資訊,更多的問題及精彩內容請關注我們的網站：http://kitchinit.com，我們會有更多的精彩內容為您呈現.

Automatic feeding mixer focuses on providing you with fresh industry information. For more questions and wonderful contents, please pay attention to our website: http://kitchinit.com , we will have more wonderful content for you