諸如自動攪拌車之類的車輛設備通常在外表上有一層油漆，以更好地維護車輛的外部和外部。因為涂料在正常操作期間很容易損壞，掉漆后的自上料攪拌車不僅僅是影響美觀，更是影響車的長久使用。因而以下內容將介紹如何維護自動攪拌車涂料不受損壞。

Vehicle equipment such as automatic mixer truck usually has a layer of paint on the surface to better maintain the exterior and exterior of the vehicle. Because the paint is easy to be damaged during normal operation, the self loading mixer after paint falling not only affects the appearance, but also affects the long-term use of the vehicle. Therefore, the following contents will describe how to maintain the paint of the automatic mixer from damage.

自動攪拌車的金屬涂層出現十分細的裂紋，而且裂紋繼續浸透涂層，直到其浸透到整個涂層為止。假如裂紋中包含蠟，則身體上會出現條紋。定期打蠟能夠逐步減少裂紋。

Very fine cracks appear in the metal coating of the automatic mixer, and the cracks continue to penetrate the coating until they penetrate the whole coating. If the crack contains wax, stripes will appear on the body. Regular waxing can gradually reduce cracks.

自動攪拌車在露出于陽光的紫外線下會蒸發并維護空氣中的油，隨著時刻的消逝，涂料會過度渙散。油漆外表的亮度和深度大大下降，油漆外表逐步變白，構成氧化層，縮短了油漆壽數。假如自動攪拌車的油漆外表被嚴峻氧化，則能夠經過研磨和拋光對其進行處理。

The automatic mixer will evaporate and maintain the oil in the air under the ultraviolet light exposed to the sun. With the passage of time, the coating will be excessively lax. The brightness and depth of the paint surface are greatly reduced, and the paint surface gradually turns white to form an oxide layer, which shortens the life of the paint. If the paint surface of the automatic mixer is severely oxidized, it can be treated by grinding and polishing.

因為自動攪拌車，外表出現磨損?？赡苁抢ハx，鳥糞，樹汁，柏油和瀝青所致。一些小的蝕刻能夠經過研磨和拋光。除了上述辦法之外，為了有效地防止油漆濺到車輛上，在駕駛時有必要留意駕駛并防止碰撞和摩擦。不然會發作其他損壞。

Because of the automatic mixer, the appearance is worn. It may be caused by insects, bird droppings, tree sap, asphalt and asphalt. Some small etching can be solved by grinding and polishing. In addition to the above methods, in order to effectively prevent paint splashing on the vehicle, it is necessary to pay attention to driving and prevent collision and friction. Otherwise, other damage will occur.

自動攪拌車在太陽紫外線的照射下，漆膜會不斷向空氣中蒸發油份以達到保護自身的作用，長時間就會導致漆面油分的過分散失。漆面的亮度、深度都大打折扣，使漆面慢慢發白，形成氧化層，縮短了車漆的壽命，肉眼就可觀察到車漆發烏、發白、無光澤等現象。

Under the ultraviolet radiation of the sun, the paint film of the automatic mixer will continuously evaporate oil into the air to protect itself, which will lead to excessive loss of paint oil for a long time. The brightness and depth of the paint are greatly reduced, which makes the paint slowly turn white and form an oxide layer, which shortens the service life of the car paint. The phenomenon of black, white and dull car paint can be observed with the naked eye.

自動攪拌車在行駛過程中由于摩擦而產生強烈的靜電層，靜電對灰塵、油污和化學粉塵吸附能力很強，時間長了會形成一層堅硬的交通膜，這種“交通膜”極易使漆面發生氧化腐蝕，這種情況可采用研磨拋光處理。

During the driving process of the automatic mixer, a strong electrostatic layer is generated due to friction. The static electricity has a strong adsorption capacity for dust, oil and chemical dust. Over a long time, a hard traffic film will be formed. This "traffic film" is very easy to oxidize and corrode the paint surface. In this case, grinding and polishing can be used.

自動攪拌車的掉漆的原因及處理分析便是以上內容了，如果您有什么想了解可以關注我們的網站kitchinit.com隨時進行咨詢。

The causes and treatment analysis of paint falling off of automatic mixer are the above contents. If you want to know anything, you can follow our website kitchinit.com Com at any time.