In order to reduce the wear and tear of the parts of Zhongke Jufeng automatic feeding mixer, we need to pay attention to this problem and share with us:

　　為了提高自身的利益，許多企業在施工過程中不斷提高工作效率。如果設備因?yàn)楣收隙S修，會增加很多費用。而通常在操作過程中使用的自動上料混合器在磨損過程中是比較常見的，那么我們應該用這種方式來避免這種情況的發生嗎?

　　In order to improve their own interests, many enterprises continue to improve their work efficiency in the construction process. If the equipment is repaired due to failure, it will increase a lot of costs. And the automatic feeding mixer which is usually used in the operation process is quite common in the wear process, so should we use this way to avoid this situation?

　　1. 保持自動上料攪拌機的額定負荷

　　1. Maintain the rated load of the automatic feeding mixer喜歡這種建筑機械設備負載性質和大小的設備部件的損失有重要影響,通用機械零件磨損將隨著負載的增加,增加的部分承擔的負荷高于設計工作負載,其組件磨損將繼續增加。

　　The loss of equipment components that like the load nature and size of such construction machinery and equipment has an important impact. With the increase of load, the load borne by the increased part will be higher than the design work load, and the component wear will continue to increase.

　　2. 及時清洗，減少機械雜質對設備的影響

　　2. Clean in time to reduce the impact of mechanical impurities on the equipment機械雜質一般是指灰塵、泥土等材料和工程機械中使用的一些自己的金屬屑、油脂等。一旦這些雜質到達機器之間的工作表面，其危害是非常大的:不僅使摩擦增加，燃油消耗增加。并會破壞潤滑油膜，劃傷表面。

　　Mechanical impurities generally refer to dust, soil and other materials, as well as some of their own metal chips and grease used in construction machinery. Once these impurities reach the working surface between machines, their harm is very great: not only increase friction, but also increase fuel consumption. It will damage the lubricating oil film and scratch the surface.

　　3.防止自動給料混合器部件腐蝕

　　3. Prevent corrosion of automatic feeding mixer components局部腐蝕，有時不易被發現，容易被忽視，危害更大。雨水、化學品在空氣中通過機械零件的管道、裂縫等滲透機械、腐蝕零件。腐蝕部件的持續運轉也會加速機械磨損，增加機械故障。這就要求管理人員和操作人員根據當?shù)氐奶鞖鈼l件、現場條件，采取合理的施工安排，限度地降低機械部件的化學腐蝕風險。

　　Local corrosion, sometimes not easy to be found, easy to be ignored, more harmful. Rainwater, chemicals in the air through the mechanical parts of the pipeline, cracks and other penetration machinery, corrosion parts. Continuous operation of corroded parts will also accelerate mechanical wear and increase mechanical failure. This requires the managers and operators to take reasonable construction arrangements according to the local weather conditions and site conditions, so as to minimize the chemical corrosion risk of mechanical parts.

　　4. 保持自動上料混合機各部件的合理溫度

　　4. Keep the reasonable temperature of all parts of the automatic feeding mixer在運行中，各部件的溫度都有自己的正常范圍。過高或過低的溫度都會影響零件的強度，所以我們需要配合冷卻劑和潤滑油來控制部分零件的溫度，使其工作在一個合理的溫度范圍內。

　　In operation, the temperature of each component has its own normal range. Too high or too low temperature will affect the strength of parts, so we need to cooperate with coolant and lubricating oil to control the temperature of some parts to make them work in a reasonable temperature range.

　　許多機械設備在初次故障時是由于部件的磨損造成的，中科聚峰自動上料攪拌機在運行過程中自然也是一樣的。因此，在使用過程中減少設備零部件的磨損，可以有效避免機械設備在使用過程中的故障。

　　Many mechanical equipment in the first failure is caused by the wear of components, Zhongke Jufeng automatic feeding mixer in the operation process is naturally the same. Therefore, in the use process, reducing the wear of equipment parts can effectively avoid the failure of mechanical equipment in the use process.