Automatic feeding mixer price: what are the main points of drum diameter?

筒體直徑選擇必須要考慮到，筒體傾斜角的大小，這也是個關重要的參數之一，因為傾斜角決定的筒體的位置，進而影響整個車的，如果不合理，那么側翻也就很容易發生。如果傾斜角過大，而筒直徑不相對減小的話那么就容易側翻。

The cylinder diameter selection must take into account the size of the cylinder inclination angle, which is also one of the most important parameters, because the position of the cylinder center of gravity determined by the inclination angle will affect the center of gravity of the whole vehicle. If the center of gravity is not reasonable, rollover will easily occur. If the inclination angle is too large and the diameter of the cylinder is not reduced, it is easy to roll over.

我們需要看一下自動上料攪拌車所使用的地段，不同的地段也是需要配備不一樣的攪拌罐的。地勢平坦的罐可以做的容量相對大一點，筒直徑可以相對大一些，地勢相對復雜的要做的筒直徑相對小一些，這樣是為了讓自動上料攪拌車更加的穩定，充分保障駕駛員的，提高環境適應能力。對于銷往世界各地的東方百合自動上料攪拌車來說，我們做車之前都會對該地區的路況進行系統分析，進而得出結論開始做車。的追求，使我們的對產品的要求，因此來東方百合機械設備有限公司，是您購車的不二選擇。

We need to take a look at the area used by the automatic feeding mixer. Different sections also need to be equipped with different mixing tanks. The tank with flat terrain can have larger capacity, larger diameter and smaller diameter. This is to make the automatic feeding mixer more stable, fully guarantee the safety of drivers and improve the adaptability to the environment. For the Oriental Lily automatic charging mixer, we will make a systematic analysis of the road conditions in the region before we make the car, and then draw a conclusion to start the car. Perfect pursuit makes our requirements for products. Therefore, it is your best choice to come to Dongfang Baihe Machinery Equipment Co., Ltd.

自動上料攪拌車是由一系列精密的系統構成。所以說，各個環節之間是相互制約，相互合作共同完成攪拌車的正常運作。因此，我們要看一下底盤的配置，主要看底盤的動力、外形尺寸、車頭質量等一系列參數，這些參數就像人的形體，而攪拌罐就像是人的衣服。東方百合機械設備有限公司，講求量體裁衣。我們在大量的數據分析和實踐的基礎下，得到了合理的配備，是廣大車友購車的不二選擇。

The automatic feeding mixer is composed of a series of precise systems. Therefore, each link is mutual restriction and cooperation to complete the normal operation of the mixer. Therefore, we should take a look at the configuration of the chassis. It mainly depends on a series of parameters, such as the power of the chassis, the overall dimensions and the mass of the front of the vehicle. These parameters are like the body of a person, while the mixing tank is like a person's clothes. Oriental Lily machinery and Equipment Co., Ltd. pays attention to tailor-made. Based on a large number of data analysis and practice, we have obtained the most reasonable equipment, which is the best choice for the majority of car owners.