In some construction process, the mixer is a relatively common machine and vehicle equipment. There are certain precautions when operating the equipment. Now, let's take a look at today's automatic loading mixer in the unloading process.

1.卸載前，將攪拌罐全速移動1-2分鐘以完全攪拌混凝土。如有必要，加一點水使混凝土更均勻地混合，使其更容易卸料。

1. Before unloading, move the mixing tank at full speed for 1-2 minutes to fully mix the concrete. If necessary, add a little water to make the concrete mix more evenly and make it easier to unload.

自動上料攪拌車

2.卸貨時，請將車停在盡可能平坦的地面上。在卸貨前，請弄濕排水漏斗斜槽，以便于清潔。

2. When unloading, please park the car on the flat ground as far as possible. Before unloading, please wet the chute of drain funnel to facilitate cleaning.

3.建議您檢查一下自己，以確保放電器在放電時不會隨意操縱放電操作桿。為了保護減速器和支撐輪，建議每次在罐頭處于向前和向后旋轉的中間位置時都停止運行。

3. It is recommended that you check yourself to ensure that the discharge operating lever will not be operated at will during discharging. In order to protect the reducer and support wheels, it is recommended to stop each time the can is in the middle of forward and backward rotation.

4.清洗水箱時，請確保沖洗干凈并在來水之前來回灑水兩次。在一次行程中，將水箱中的所有水填充到水箱中，然后返回工作站加水以完全清潔水箱。

4. When cleaning the water tank, make sure that it is clean and spray water twice before the water comes. On the last trip, fill the tank with all the water from the tank and return to the workstation to add water to completely clean the tank.

希望在操作和使用自動上料攪拌車的過程中，我們每個人都需要了解這些注意事項，以確保設備的良好運行性能。避免由于對操作中的設備了解不足而導致操作錯誤，從而影響正常施工過程。

It is hoped that in the process of operating and using the automatic feeding mixer, each of us needs to understand these precautions to ensure the good operation performance of the equipment. Avoid the operation error caused by insufficient understanding of the equipment in operation, thus affecting the normal construction process.

自動上料攪拌車的卸料時的注意事項就是這些，歡迎來電咨詢更多內容！

These are the matters needing attention when discharging the automatic feeding mixer. Please call us for more information!