It's made by melting a hundred swords. The handle is not divided, and the attack and defense are uncertain. The shape is thin and long. It can be hidden in a bamboo pole. Once it comes out of the sheath, the cold light will flash and vibrate like a waterfall. Therefore, it is named Tianpu sword! Automatic mixer is like a sword of waterfall. It integrates feeding and mixing. It can intelligently feed ingredients and automatically load mixing. It is a real all-in-one machine. It is small, flexible, time-saving, labor-saving and site-saving! There are also strict requirements for its wear inspection. What are the specific requirements? Let's go and have a look!

，針對自動攪拌車的具體磨損情況，我們應觀察機油顏色、品質方面是否出現問題，觀察外表是否存在鐵屑，檢查機油粘性。若機油中存在很多鐵屑，則說明曲軸瓦、連桿瓦位置出現嚴重磨損情況。若機油呈現粘稠狀態，說明機油已經有很長時間卻未經過更換。

First of all, in view of the specific wear of the automatic mixer, we should observe whether there are problems in the color and quality of the engine oil, whether there are iron filings on the surface, and check the viscosity of the engine oil. If there are a lot of iron filings in the engine oil, it means that the crankshaft bearing and connecting rod bearing are seriously worn. If the oil is viscous, it means that the oil has not been changed for a long time.
                

在拆開連桿活塞的曲軸時，觀察連桿瓦、曲軸瓦具體狀況，整機均不可使用。若磨損情況不嚴重，可讓其經過磨軸加工后，自動攪拌車方可使用。

When disassembling the crankshaft of connecting rod piston, observe the specific conditions of connecting rod bush and crankshaft bush, and the whole machine can not be used. If the wear condition is not serious, the automatic mixer can only be used after grinding.

觀察氣缸套的具體磨損情況，在拆開缸套時，禁止打到發動機機體，避免出現嚴重損壞情況。

Observe the specific wear condition of the cylinder liner. When disassembling the cylinder liner, it is forbidden to hit the engine block to avoid serious damage.

對于自動攪拌車來說，在整個維修期間，每個動作都應謹慎小心，任何一個細節的錯誤都會致使發動機不能達到正常工作狀態，因此在對自動攪拌車維修時，應請的技術人員進行，避免出現更大失誤。

For the automatic mixer, during the whole maintenance period, every action should be careful, any detail error will cause the engine can not reach the normal working state, so in the maintenance of the automatic mixer, we should ask professional technical personnel to carry out, to avoid more mistakes.