After using the automatic feeding mixer for a long time, there will be some faults, which requires maintenance. If the maintenance is wrong, it will cause secondary damage to the automatic feeding mixer. Therefore, the following points should be paid attention to when carrying out maintenance:

 

1、不能用水直接沖洗自動上料攪拌車身，自動上料攪拌車身內部機構是比較復雜的，凹槽、通孔設計比較多，一旦用水沖洗了，那么水分沉積在機身內不容易干燥，就容易使得零部件銹蝕。

 

1. It is not possible to directly wash the automatic feeding and mixing body with water. The internal mechanism of the automatic feeding and mixing body is relatively complex, and there are many grooves and through-holes. Once the body is washed with water, the water will not be easy to dry in the body, and the parts will be easy to rust.

 

2、不能夠給自動上料攪拌車的輪胎栓螺母涂油，不少司機認為給輪胎栓螺母涂潤滑油能夠避免螺栓螺母生銹，事實上，這種做法是非常危險的，因?yàn)樗鼤?huì)給攪拌車行車帶來極大的隱患。螺栓和螺母擰緊之后本身是有自鎖特點的，而潤滑油則會讓自鎖系數下降。自動上料攪拌車運作過程中，螺栓螺母一旦松動就會產生事故。

 

2. It is not possible to oil the tire bolts and nuts of the automatic loading mixer. Many drivers think that lubricating the tire bolts and nuts can prevent the bolts and nuts from rusting. In fact, this practice is very dangerous, because it will bring great safety risks to the mixer. Bolts and nuts have self-locking characteristics after tightening, while lubricating oil will reduce the self-locking coefficient. During the operation of automatic feeding mixer, once the bolts and nuts are loose, safety accidents will occur.

 

自動上料攪拌車

 

Automatic feeding mixer

 

3、電噴車啟動時候不能踩油門，一旦踩油門了，那自動上料攪拌車發動機會出現啟動不良的狀況。

 

3. When the EFI truck starts, you can't step on the accelerator. Once you step on the accelerator, the engine of the automatic feeding mixer truck will start badly.

 

大家在進行自動上料攪拌車維修的時候一定要注意上面這些問題，這些問題不是一些小問題，希望大家能夠注意這些問題，以免再次對自動上料攪拌車造成傷害。

 

We must pay attention to the above problems when maintaining the automatic feeding mixer. These problems are not small problems. We hope that you can pay attention to these problems, so as to avoid causing damage to the automatic feeding mixer again.