Construction needs a lot of concrete, but the transportation is very inconvenient, now with the automatic feeding mixer, this problem is solved. The automatic feeding mixer has many parts, which can be roughly divided into ten systems: chassis system, hydraulic transmission system, mixing tank body, discharging system, cleaning system, subframe, control system, supporting wheel system, feeding system and circuit system. The following small series for you to introduce the automatic feeding mixer of the top ten structure system composition.

自動上料攪拌車的十大結構系統組成

Composition of ten structural systems of automatic feeding mixer

一、自動上料攪拌車的十大結構系統組成

1、 Composition of ten structural systems of automatic feeding mixer

1、底盤系統：自動上料攪拌車的主要組成部分，整個自動上料攪拌車的運輸就是有地盤來實現的。

1. Chassis system: the main component of the automatic feeding mixer. The transportation of the whole automatic loading mixer is realized by the site.

2、托輪系統：自動上料攪拌罐后部與副車架連接的部位，主要起支撐滾筒體的作用。

2. Supporting roller system: the part connecting the rear part of the automatic feeding mixing tank and the sub frame, mainly plays the role of supporting the drum body.

自動上料攪拌車的十大結構系統組成

Composition of ten structural systems of automatic feeding mixer

3、攪拌罐體：攪拌筒是整個自動上料攪拌車的關鍵部分，是存儲混凝土的容器，對防止混凝土固化、離析起著決定性的作用。管體內部有葉片，主要起攪拌與導料的作用。

3. Mixing tank: the mixing drum is the key part of the whole automatic loading mixer, and it is the container for storing concrete, which plays a decisive role in preventing the solidification and segregation of concrete. There are blades inside the pipe body, which mainly play the role of mixing and guiding materials.

4、出料系統：主要由主卸料槽、副卸料槽、鎖緊桿等組成，副卸料槽起延長主卸料槽的作用。

4. Discharge system: it is mainly composed of main discharge trough, auxiliary discharge groove and locking rod, etc. the auxiliary discharge groove plays the role of extending the main discharge tank.

自動上料攪拌車的十大結構系統組成

Composition of ten structural systems of automatic feeding mixer

5、電路系統：主要指整個的電路，包括整車的尾燈，側標志燈、示廊燈、冷卻風扇電機等。

5. Circuit system: mainly refers to the whole circuit, including tail lamp, side marker lamp, corridor lamp, cooling fan motor, etc.

6、副車架：自動上料攪拌車副車架是主要的承重部分，作業時的荷載幾乎都是通過它來支撐在傳遞給底盤。自動上料攪拌車副車架還起到緩解路面的顛簸、減速形成的沖擊荷載的作用。

6. Sub frame: the sub frame of the automatic feeding mixer is the main load-bearing part, and the load during operation is almost all supported by it and transferred to the chassis. The sub frame of the automatic loading mixer also plays a role in relieving the impact load caused by the bumps and deceleration of the road surface.

自動上料攪拌車的十大結構系統組成

Composition of ten structural systems of automatic feeding mixer

7、操作系統：自動上料攪拌車操作系統由控制器、聯動軸、軟軸及連桿機構組成，主要控制攪拌筒的轉速及旋轉方向。

7. Operating system: the operation system of automatic feeding mixer is composed of controller, linkage shaft, flexible shaft and connecting rod mechanism, which mainly controls the rotation speed and rotation direction of mixing drum.

8、液壓傳動系統：將經取力器取出的發動機動力，轉化為液壓能（排量和壓力），再經馬達輸出為機械能（轉速和扭矩），為攪拌筒轉動提供動力。

8. Hydraulic transmission system: the engine power taken out by the power take-off is converted into hydraulic energy (displacement and pressure), and then output to mechanical energy (speed and torque) by motor to provide power for the rotation of mixing drum.

自動上料攪拌車的十大結構系統組成

Composition of ten structural systems of automatic feeding mixer

9、進料系統：主要由進料斗與支架組成，進料斗由于受沖擊磨損較大，材料要求耐磨性好，支架主要起減輕沖擊力的作用。

9. Feeding system: it is mainly composed of feeding hopper and support. Due to the impact wear of feeding hopper is large, the material requirement is good wear resistance, and the support mainly plays the role of reducing impact force.

10、清洗系統：清洗系統主要由壓力水箱、水槍、水管、閥等組成。采用氣壓供水，主要作用是在裝完料后沖洗料斗及出料完畢后沖洗攪拌筒、卸料槽，防止混凝土粘結。

10. Cleaning system: the cleaning system is mainly composed of pressure water tank, water gun, water pipe, valve, etc. The pneumatic water supply is mainly used to flush the hopper after loading and the mixing drum and discharge tank after discharging to prevent concrete from sticking.