The selection of the cylinder diameter must take into account the size of the cylinder tilt angle, which is also one of the most important parameters, because the tilt angle determines the position of the center of gravity of the cylinder, and then affects the center of gravity of the whole car. If the center of gravity is unreasonable, then rollover is easy to occur. If the inclination angle is too large and the diameter of the cylinder is not relatively reduced, it is easy to roll over.

我們需要看一下自動上料攪拌車所使用的地段，不同的地段也是需要配備不一樣的攪拌罐的。地勢平坦的罐可以做的容量相對大一點，筒直徑可以相對大一些，地勢相對復雜的要做的筒直徑相對小一些，這樣是為了讓自動上料攪拌車更加的穩定，充分保障駕駛員的，提高環境適應能力。

We need to look at the sections used by the automatic feeding mixer. Different sections also need to be equipped with different mixing tanks. The capacity of the tank with flat terrain can be relatively large, the diameter of the cylinder can be relatively large, and the diameter of the cylinder with relatively complex terrain can be relatively small. This is to make the automatic feeding mixer more stable, fully guarantee the safety of the driver, and improve the environmental adaptability.

對于銷往世界各地的自動上料攪拌車來說，我們做車之前都會對該地區的路況進行系統分析，進而得出結論開始做車。的追求，使我們的對產品的要求，因此來中科聚峰廠家，是您購車的不二選擇。

For the automatic feeding mixer sold all over the world, we will make a systematic analysis of the road conditions in this area before we make the car, and then draw a conclusion to start making the car. The pursuit of perfection makes us meet the requirements of our products. Therefore, coming to Zhongke Jufeng factory is your best choice to buy a car.

自動上料攪拌車是由一系列精密的系統構成。所以說，各個環節之間是相互制約，相互合作共同完成攪拌車的正常運作。

Automatic feeding mixer is composed of a series of precise systems. Therefore, each link restricts and cooperates with each other to complete the normal operation of the mixer.

因此，我們要看一下底盤的配置，主要看底盤的動力、外形尺寸、車頭質量等一系列參數，這些參數就像人的形體，而攪拌罐就像是人的衣服。

Therefore, we need to look at the configuration of the chassis. It mainly depends on a series of parameters such as the power of the chassis, the overall dimensions, and the mass of the front of the car. These parameters are like a person's body, while the mixing tank is like a person's clothes.