RM新时代入口

歡迎來到中科聚峰機械有限公司!

24小時服務熱線:

400-879-1999

點擊撥打服務熱線:400-879-1999
當前位置:首頁>新聞中心>常見問題無法啟動自上料攪拌車的診斷點

無法啟動自上料攪拌車的診斷點

來源:http://kitchinit.com/ 日期:2021-07-13 發布人:admin
概述:確定堵塞的原因。應測試電池,以診斷混凝土運輸攪拌機不會引起這種故障。您需要檢查電池電量是否不足
自上料攪拌車的每個系統都是正常的,但無法啟動。是什么原因?接下來,請告訴我診斷要點。
Every system of self feeding mixer is normal, but it cannot be started. What is the reason? Next, please tell me the diagnosis points.
1.確定堵塞的原因。應測試電池,以診斷混凝土運輸攪拌機不會引起這種故障。您需要檢查電池電量是否不足。
1. Determine the cause of the blockage. The battery should first be tested to diagnose that the concrete transport mixer will not cause this failure. You need to check if the battery is low.
2.測試并引導系統。在引導系統中測試電路。關于基本配置,用于引導系統的電路通常包括電池,啟動器電動機和連接這些組件的電纜。此外,焚燒開關,啟動繼電器或螺線管以及車輛防盜系統也是啟動系統的重要組成部分。
2. Test and boot the system. Test the circuit in the boot system. With regard to the basic configuration, the circuits used to guide the system usually include batteries, starters, motors, and cables connecting these components. In addition, the incinerating switch, starting relay or solenoid and vehicle anti-theft system are also important parts of the starting system.
3.焚燒同步帶的檢測似乎沒有火花,這也是無法啟動的原因。
3. There seems to be no spark in the detection of burning synchronous belt, which is also the reason why it cannot be started.
4.檢查火花的質量。您可以卸下焚燒線圈,然后使用火花探測器檢測火花是否正常。
4. Check the quality of spark. You can remove the incineration coil and use the spark detector to check whether the spark is normal.
5.檢查燃油系統。燃油系統診斷可分為兩部分:燃油供應系統診斷和噴油器回路診斷??梢酝ㄟ^(guò)測量燃油的流量和壓力來檢測燃油供應系統。測量燃油流量的一種好方法是加載燃油供應管線并測試管線。
5. Check the fuel system. Fuel system diagnosis can be divided into two parts: fuel supply system diagnosis and injector circuit diagnosis. The fuel supply system can be detected by measuring the fuel flow and pressure. A good way to measure fuel flow is to load the fuel supply line and test the line.
6.防盜系統檢測:防盜系統中也會出現一些經常被忽視的燃油供應系統。一些混頻器制造商在防盜系統的數據流中包含參數標識。在許多型號上,防盜系統模塊在沒有適當初始化的情況下會發生變化。
6. Detection of anti-theft system: there will also be some fuel supply systems that are often ignored in the anti-theft system. Some mixer manufacturers include parameter identification in the data stream of anti-theft system. On many models, the theft deterrent module changes without proper initialization.
上面是自上料攪拌車無法啟動診斷方法的問題,但是當然,未提及的其他方面也會影響它,因此,如果您可以參考它,我將不勝感激。
The above is the problem that the self feeding mixer can not start the diagnosis method, but of course, other aspects not mentioned will also affect it, so if you can refer to it, I will be very grateful.

截屏,微信識別二維碼

RM新时代入口