The automatic mixer truck is mainly used to transport construction concrete, and the cylindrical mixing drum is used to transport the mixed concrete. During transportation, the mixing drum can keep rotating so that the concrete will not set. So, how much do you know about the parts of the mixing tank?
攪拌罐是攪拌車的重要部件之一，要求的技術含量比較高，其技術含量會直接影響混凝土的質量，所以攪拌罐的設計比較高，公差范圍要小。攪拌槽內的葉片一般我們使用的是雙對數螺旋。
The mixing tank is one of the important parts of the mixer truck, which requires high technical content, which will directly affect the quality of concrete, so the design of the mixing tank is relatively high and the tolerance range is small. Generally, we use double logarithmic helix for the blades in the mixing tank.
攪拌槽內的葉片有效的提高了混凝土的卸料的性能，出料口前的葉片上一般都帶有孔洞，這樣可以有效的降低了混凝土對葉片的粘結性能，提高出料的平均性。整個葉片從攪拌罐底部的滑動角度不斷增加，以確保葉片能充分?jǐn)嚢杌炷?，降低殘留率?/div>
The blades in the mixing tank effectively improve the discharge performance of concrete. The blades in front of the discharge port are generally equipped with holes, which can effectively reduce the bonding performance of concrete to the blades and improve the average discharge. The sliding angle of the whole blade from the bottom of the mixing tank continues to increase to ensure that the blade can fully mix the concrete and reduce the residue rate.
我們知道一般攪拌罐的材質都會使用到高強度的鋼板，在攪拌罐成型后，拆下內支架，焊接葉片。焊接工藝我們一般使用的是碳氧化物保護膜，攪拌罐制作后進行噴丸處理，焊接和制作過程中產生的應力，提高鍍層的附著力。
We know that generally, high-strength steel plates are used for the material of the mixing tank. After the mixing tank is formed, the inner support is removed and the blades are welded. We generally use carbon oxide protective film for welding process. Shot blasting is carried out after the production of stirring tank to eliminate the stress generated in the process of welding and production and improve the adhesion of coating.
此外攪拌筒是整個攪拌運輸車的關鍵部件，作為存儲混凝土的容器，對防止其固化、離析起著決定性的作用。它由拌筒體、托輪等組成。
In addition, the mixing drum is the key component of the whole mixing truck. As a container for storing concrete, it plays a decisive role in preventing its solidification and segregation. It is composed of mixing cylinder, supporting wheel, etc.
筒體由前錐段、后錐段、圓柱段、封頭、葉片、進料小錐、滾道等組焊而成。前端與減速機連接在一起，后部通過托輪支撐在副車架上。托輪起支撐滾筒體的作用，由支座、軸承座、軸、軸承等組成。
The cylinder is assembled and welded by front cone section, rear cone section, cylindrical section, head, blade, feeding cone, raceway, etc. The front end is connected with the reducer, and the rear end is supported on the subframe through supporting wheels. The supporting wheel plays the role of supporting the drum body and is composed of support, bearing seat, shaft, bearing, etc.
攪拌筒的殼體及葉片都由高強度鋼板制作而成，具有更高的耐磨性。封頭整體一次旋壓成形，與加強板焊接后具有足夠的剛度與強度。
The shell and blades of the mixing drum are made of high-strength steel plates, which have higher wear resistance. The head is formed by one-time spinning and has sufficient stiffness and strength after welding with the reinforcing plate.
經過優化設計的攪拌筒，具有可靠的結構剛度，良好的耐磨性能，流暢地進出料，低的殘留量，既可攪拌混凝土，又可攪動輸送預拌混凝土，決無出料離析現象，確保了混凝土的勻質性能。
The optimized mixing drum has reliable structural rigidity, good wear resistance, smooth feeding and discharging, and low residue. It can not only mix concrete, but also agitate and transport ready mixed concrete. There is no discharge segregation phenomenon, ensuring the homogeneity of concrete.
The explanation of the use of the mixing tank parts of the automatic mixer is the above content. I believe you will be more interested in it. For more information, please follow our website http://kitchinit.com Consult!
點擊撥打服務熱線：400-879-1999
