自動攪拌車這種機械設備在長時間的使用過程中，為了能夠保持其良好的操作性能，則需要我們不定期的對其進行潤滑工作。那么在對設備添加潤滑油的過程中我們應該要注意哪些事項呢？

During the long-term use of mechanical equipment such as automatic mixer, in order to maintain its good operating performance, we need to lubricate it irregularly. What should we pay attention to in the process of adding lubricating oil to the equipment?

1、自動攪拌車在運轉過程中不得檢修和潤滑。

1. The automatic mixer shall not be overhauled and lubricated during operation.

2、定期向各黃油嘴加注黃油，軸端密封處每4小時注潤滑油一次，每周排污一次。

2. Regularly add grease to each grease fitting, inject lubricating oil to the shaft end seal every 4 hours, and blow down once a week.

3、自動攪拌車在使用后酌情對各潤滑點加注必要的潤滑油（滾輪軸、滾輪、鋼絲繩等活動部位）。

3. After the automatic mixer is used, necessary lubricating oil (roller shaft, roller, steel wire rope and other moving parts) shall be added to each lubricating point as appropriate.

4、自動攪拌車減速箱的齒輪和軸承是利用齒輪回轉將機油飛濺到箱體內壁，流入軸承中去進行潤滑的。減速箱的油面應保持在油標尺兩刻線之間為宜。油面過高或過低會導致各部溫度升高或潤滑不良，增加功率損耗和造成機器工作不良。

4. The gears and bearings of the reduction gearbox of the automatic mixer use the gear rotation to splash the oil onto the inner wall of the box and flow into the bearings for lubrication. The oil level of the reduction gearbox should be kept between the two scribed lines of the oil scale. Too high or too low oil level will cause temperature rise or poor lubrication of all parts, increase power loss and cause poor operation of the machine.

5、自動攪拌車選用的潤滑油應具有一定購粘度和粘溫特性，凝點低，抗氧化安定性良好，沒有機械雜質和水分，不合腐蝕和磨損物質等。其質量指標應符合標準規定。

5. The lubricating oil selected for the automatic mixer shall have certain viscosity and viscosity temperature characteristics, low freezing point, good anti-oxidation stability, no mechanical impurities and moisture, and no corrosion and wear substances. Its quality indicators shall conform to the provisions of national standards.

自動攪拌車進行潤滑工作是為了能有效減少磨損，提高元部件的使用壽命。不過在進行添加潤滑油的過程中也要注意一些事項，新機開始使用頭150小時和300小時要分別更換機油一次，以便排除試車時未完全洗凈的污物。工作時，要經常檢查油面高度，不足應及時添補。關注我們http://kitchinit.com，了解更多！

The lubrication of automatic mixer truck is to effectively reduce wear and improve the service life of components. However, in the process of adding lubricating oil, attention should also be paid to some matters. The engine oil should be changed once in the first 150 hours and 300 hours after the new machine is put into use, so as to remove the dirt that has not been completely cleaned during commissioning. During operation, the oil level shall be checked frequently, and any deficiency shall be supplemented in time. Follow us http://kitchinit.com Yes, learn more!