目前市場上的自動上料攪拌車種類眾多，不同的攪拌機工作原理不同，其運轉方向也不盡相同。小編就常見的強制式和滾筒式攪拌機的運轉方向做詳細介紹。

At present, there are many kinds of automatic feeding mixers in the market. Different mixers have different working principles and different running directions. Small series on the common forced and drum mixer running direction to do a detailed introduction.

1.強制式自動上料攪拌車

Automatic feeding of forced mixer

當強制式攪拌機啟動開始轉動之后，在葉片的轉動帶動下，投入到攪拌機內的物料在兩個拌合筒中上下的翻滾，做規(guī)則的圓周運動；與此同時，葉片之間的相互錯開的位置關系讓混合料在攪拌轉動中能夠變換位置，在葉片重疊的位置上混合物會在葉片的推動下以及轉動軸的攪動下從一個旋轉平面向另一個旋轉平面運動。

When the forced mixer starts to rotate, the materials put into the mixer will roll up and down in two mixing drums under the rotation of blades, making regular circular motion; at the same time, the staggered position relationship between the blades enables the mixture to change its position in the mixing rotation. At the position where the blades overlap, the mixture will be driven by the blades and Under the agitation of the rotating shaft, it moves from one rotating plane to another.

這樣的復雜攪拌過程使得混合料能夠更加有效的、更充分的進行混合和攪拌，實現(xiàn)攪拌均勻，保證了混凝土的攪拌質量。

Such a complex mixing process makes the mixture more effective and sufficient for mixing and mixing, achieving uniform mixing and ensuring the mixing quality of concrete.

2.滾筒式自動上料攪拌車

2. Drum type automatic feeding mixer

滾筒式自動上料攪拌機為攪拌筒的構造，簡體為雙錐形，筒內焊有高、低葉片，分別與拌筒軸線成一定夾角。攪拌進，隨著拌筒旋轉，葉片使物料在提升、下落的同時，又作軸向往復攪動，因此攪拌強烈，效果較好。其運轉方向為正方向攪拌而反方向出料。

The drum type automatic feeding mixer is the structure of mixing drum. The cylinder is of double cone shape. High and low blades are welded in the drum, which form a certain angle with the axis of mixing drum. With the rotation of the mixing drum, the blades make the material rise and fall, and at the same time, it makes the axial reciprocating stirring. Therefore, the mixing is strong and the effect is good. Its running direction is mixing in the positive direction and discharging in the opposite direction.

提醒用戶在啟動攪拌電動機時，運轉方向應與標牌指示方向一致，如方向不對，應改變電源接線。

Remind the user that when starting the mixing motor, the running direction should be consistent with the direction indicated on the label. If the direction is wrong, the power wiring should be changed.子航料