概述：自動攪拌一體車是一種特殊的專用行駛車輛，有特定的工作環境，難免發動機水溫過高。每當這種情況發生時，都會對設備產生特定的影響。那如果水溫太高怎么辦？然后編輯會告訴您。
自動攪拌一體車是一種特殊的專用行駛車輛，有特定的工作環境，難免發動機水溫過高。每當這種情況發生時，都會對設備產生特定的影響。那如果水溫太高怎么辦？然后編輯會告訴您。
Automatic mixer truck is a kind of special driving vehicle, which has a specific working environment, so it is inevitable that the engine water temperature is too high. Whenever this happens, it will have a specific impact on the device. What if the water temperature is too high? Then the editor will tell you.
1.在正常道路上，自動攪拌一體車的發動機過熱，因此應盡快減速，在樹蔭下行駛，或在相對涼爽的地方行駛并停止。此時不要急著拖延。
1. On the normal road, the engine of the automatic mixer truck is overheated, so it should slow down as soon as possible, drive in the shade of trees, or drive in a relatively cool place and stop. Don't delay at this time.
2.打開發動機蓋，以怠速運轉發動機，然后等待發動機溫度逐漸恢復正常。當發動機的水溫恢復正常時，請停止發動機。之后，請稍等片刻，直到發動機水溫充分下降，然后檢查發動機冷卻水量。
2. Open the engine cover, run the engine at idle speed, and then wait for the engine temperature to gradually return to normal. When the water temperature of the engine returns to normal, stop the engine. After that, please wait for a moment until the engine water temperature drops sufficiently, and then check the engine cooling water volume.
3.此時，自動混水車發動機的冷卻水量可能會嚴重不足。在補充指定量的冷卻水后，可以再次檢查冷卻系統以確認沒有其他異常，然后可以啟動發動機并繼續運行。另外，檢查水箱的百葉窗沒有被異物堵塞，風扇葉片是否運轉，發動機皮帶沒有打滑以及發動機水泵是否運轉。
3. At this time, the cooling water of the engine of the automatic mixer may be seriously insufficient. After replenishing the specified amount of cooling water, the cooling system can be checked again to confirm that there are no other abnormalities, and then the engine can be started and continue to run. In addition, check that the blinds of the water tank are not blocked by foreign matters, whether the fan blades are running, whether the engine belt is not slipping, and whether the engine water pump is running.
上面的編輯介紹的有關知識是關于自動攪拌一體車小型上水溫過高的處理方法，我想每個人都對此有所了解。如果遇到此問題，可以使用上面的方法適當?shù)厮?/div>
The above editor introduced the relevant knowledge about the treatment method of high water temperature in small automatic mixer truck, which I think everyone knows. If you encounter this problem, you can use the above method to solve it properly.
點擊撥打服務熱線：400-879-1999
