自動攪拌車的出現和使用，可以為各類工程施工提供諸多便利，但是在使用過程中也會出現各種各樣的問題，比如說自動攪拌車離合器的損壞，這是什么原因造成的呢

　　The emergence and use of automatic mixer can provide a lot of convenience for all kinds of engineering construction, but there will also be a variety of problems in the process of use, such as damage to the clutch of automatic mixer car, what is the cause of this

　　用戶需要保證自動攪拌車的性能，重要的配件之一是變速器換檔器。自動攪拌車離合器損壞的原因當動力換檔變速箱離合器接合時，液壓油的壓力克服彈簧力壓住摩擦片。隨著液壓油壓力的升高，摩擦片與金屬盤接觸并逐漸被壓縮，使離合器能夠平穩地將飛輪的動力傳遞到變速器輸入軸。

　　Users need to ensure the performance of the agitator, one of the important parts is the transmission shifter. When the power shift transmission clutch engages, the pressure of the hydraulic oil overcomes the spring force and presses down on the friction plate. As the hydraulic oil pressure increases, the friction plate comes into contact with the metal plate and gradually compresses, allowing the clutch to smoothly transfer flywheel power to the transmission input shaft.

　　自動攪拌車離合器活塞密封性能檢測裝載機無法行走或油溫過高時，需要判斷離合器活塞是否密封不嚴或油壓不足引起，但有時很難確定是哪種原因是由常規測試方法引起的。組裝后的傳動總成的密封圈更難檢查，尤其是在攪拌車沒有動力的情況下。這時可以使用氣壓閥進行測試。

　　When the loader cannot walk or the oil temperature is too high, it is necessary to judge whether the clutch piston is not tightly sealed or caused by insufficient oil pressure, but sometimes it is difficult to determine which reason is caused by conventional test methods. The seals on the assembled transmission assembly are more difficult to inspect, especially if the mixer is not powered. This can be tested using a pneumatic valve.

　　自動攪拌車離合器損壞的原因已經找到了，是因?yàn)樗淖兯倨鲹Q擋器出現了故障，這就需要用戶提前做好預防工作了。那么想了解更多，就來這里kitchinit.com看看吧。

　　The cause of the clutch damage of the agitator has been found because of the failure of its transmission shifter, which requires the user to take precautions in advance. To learn more, check it out here at kitchinit.com/.