What problems should be paid attention to when adding lubricant for self feeding small row mixer?

機械設備（例如自上料小行型攪拌車）需要不時潤滑，以在長期使用中保持良好的運行性能。那么，在設備中添加潤滑劑時應注意什么？

Mechanical equipment (such as self feeding small row mixer) needs to be lubricated from time to time to maintain good operation performance in long-term use. So, what should be paid attention to when adding lubricant to the equipment?

1.在操作過程中，請勿對自上料小行型攪拌車進行修理和潤滑。

1. Do not repair and lubricate the self feeding small row mixer during operation.

2.定期在每個注油嘴中添加黃油，并每4小時對軸端密封處的油進行潤滑，并每周排干一次。

2. Regularly add grease to each nozzle, lubricate the oil at the shaft end seal every 4 hours, and drain off once a week.

3.使用自上料小型攪拌車后，根據需要在每個潤滑點添加必要的潤滑劑（滾筒軸，滾筒，鋼絲繩和其他有效部件）。

3. Add necessary lubricant (drum shaft, drum, wire rope and other effective parts) at each lubrication point as required after using the small row mixer.

4.自上料小型攪拌車的減速器的齒輪和軸承通過齒輪旋轉將油濺入油箱的內壁，并流入軸承進行潤滑。變速箱油位應保持在燃油表的兩條線之間。油位太高或太低都會導致每個組件的溫度升高或潤滑不良，從而增加功率損耗并導致機器運行不佳。

4. The gear and bearing of the reducer of the small row mixer truck will splash the oil into the inner wall of the oil tank through the rotation of the gear and flow into the bearing for lubrication. The transmission oil level should be maintained between the two lines of the fuel gauge. If the oil level is too high or too low, the temperature of each component will rise or the lubrication will be poor, which will increase the power loss and cause the machine to run poorly.

5.選用自上料小型攪拌車的潤滑油應具有一定的粘度和粘度溫度特性，凝固點低，氧化穩定性好，無機械雜質和水分，無腐蝕和耐磨材料。其質量指標應符合國家標準。

5. The lubricating oil of self feeding small row mixer should have certain viscosity and viscosity temperature characteristics, low freezing point, good oxidation stability, no mechanical impurities and moisture, no corrosion and wear-resistant materials. The quality index should meet the national standard.

自上料小型攪拌車用于潤滑，減少磨損并延長部件壽命。但是，添加潤滑劑時需要采取一些預防措施。應該在前150個小時和300個小時內更換新機器，以消除在測試過程中未完全清除的灰塵。工作時，請務必檢查油位并及時添加。

Self feeding small row mixer is used for lubrication, reducing wear and prolonging the service life of components. However, some precautions need to be taken when adding lubricants. A new machine should be replaced within the first 150 hours and 300 hours to eliminate dust that was not completely removed during the test. When working, please check the oil level and add it in time.

自上料小型攪拌車添加潤滑劑注意了解就是這些，你明白了嗎？

Add lubricant from the small line mixer, and understand that's all. Do you understand?
自動上料攪拌車