（1）過度使用緊急制動。在山坡上行駛時，在下坡道路上緊急制動可能會導致前鋼板斷裂。由于制動力，自動上料攪拌車的大部分負載質量都被前板簧推進并承受，這很可能導致板簧的疲勞損壞。建議使用排氣制動器以減少緊急制動。

(1) Excessive use of emergency brake. When driving on hillside, emergency braking on downhill road may lead to fracture of front steel plate. Due to the braking force, most of the load mass of the automatic feeding mixer is pushed and sustained by the front leaf spring, which may lead to the fatigue damage of the leaf spring. Exhaust brake is recommended to reduce emergency braking.

（2）前輪制動器調節太緊。如果后輪的制動性能不佳或出現突然的問題，請施加緊急制動，以使前板簧過分折斷。

(2) Front wheel brake adjustment too tight. If the braking performance of the rear wheel is poor or there is a sudden problem, please apply emergency braking to make the front leaf spring break excessively.

（3）路面不良，超載，行駛速度大，前板簧受到過大的沖擊力，容易造成損壞。

(3) Poor road surface, overload, high driving speed, front leaf spring subjected to excessive impact force, easy to cause damage.

（4）前板簧經常過載時間過長，彈性和剛度降低，疲勞破壞。

(4) The front leaf spring is often overloaded for a long time, the elasticity and stiffness are reduced, and the fatigue damage is caused.

（5）更換質量較差的板簧，并且葉片的曲率不符合標準。鋼板材料不好或熱處理不好，導致應力不均和斷裂。

(5) Replace the poor quality leaf spring, and the curvature of the blade does not meet the standard. The steel plate material is not good or heat treatment is not good, resulting in uneven stress and fracture.

自動上料攪拌車鋼板斷裂情況介紹就是這樣，希望對你有幫助。

Automatic feeding mixer steel plate fracture is like this, I hope to help you.