Automatic feeding mixer will naturally increase the temperature during long-term operation, but if the temperature exceeds the temperature that the equipment can bear, it will cause some damage to the equipment. Therefore, when the temperature of the equipment is too high, we need to carry out the corresponding maintenance work. Let's see.

1，防止發動機過熱：由于環境溫度高，發動機容易過熱。必須加強發動機冷卻系統的檢查和維護。這包括檢查水箱，恒溫器，泵，風扇等，并注意及時添加它們。注意冷卻水。當水溫超過100°C時，請停在陰涼處冷卻，讓發動機空轉，然后打開引擎蓋以幫助散熱。

1. Prevent the engine from overheating: due to the high ambient temperature, the engine is easy to overheat. The inspection and maintenance of engine cooling system must be strengthened. This includes checking water tanks, thermostats, pumps, fans, etc. and adding them in time. Pay attention to the cooling water. When the water temperature exceeds 100 ° C, please stop in a cool place for cooling, let the engine idle, and then open the hood to help heat dissipation.

2，防止發動機爆燃：夏季氣溫很高，有時會超過35°C，并且在這樣的季節，對于汽車的某些老化零件，自然爆燃的可能性要高得多。因此要做好預防工作。

2. Prevent engine deflagration: in summer, the temperature is very high, sometimes more than 35 ° C, and in this season, the possibility of natural deflagration is much higher for some aging parts of the car. Therefore, we should do a good job in prevention.

3，防止汽車漆面損壞：汽車漆面老化后，強烈的陽光照射下，會老化，起皺，普通的美容打蠟可以起到一定的防曬作用，但由于任何汽車蠟中都含有鉍成分，長期紫外線會將該漆面生銹，留下一點黑點。車蠟本身并不能提高硬度和抗紫外線性，但是由于高溫會很快消失。停車時，請注意將車停在陰涼處。

3. Prevent the damage of automobile paint surface: after the automobile paint surface is aged, it will age and wrinkle under the strong sunlight. Ordinary beauty waxing can play a certain role in sun protection, but because any automobile wax contains bismuth, long-term ultraviolet light will rust the paint surface, leaving a little black spot. The car wax itself can not improve the hardness and anti UV linearity, but it will soon disappear due to high temperature. When parking, please pay attention to park in the shade.

4，防止汽車輪胎爆裂：高溫時，容易刺穿，溫度過高時，輪胎容易變形，抗拉強度降低。由于輪胎本身不是標準氣壓，輪胎會老化，性能減弱，或者在行駛過程中輪胎滾動成硬質金屬或其他硬物，從而導致汽車突然爆裂。

When the temperature is too high, it is easy to puncture the tire. Because the tire itself is not the standard pressure, the tire will aging, performance degradation, or in the process of driving the tire rolling into hard metal or other hard objects, resulting in a sudden car burst.

5，防止發動機潤滑：溫度高時，機油粘度降低，導致潤滑不良。因此，請務必檢查機油的質量并及時添加或更換。注意及時清潔機油濾清器和散熱器，以確保機油暢通，散熱良好，并避免發動機過載。

5. Prevent engine lubrication: when the temperature is high, the oil viscosity will decrease, resulting in poor lubrication. Therefore, be sure to check the quality of the oil and add or replace it in time. Pay attention to clean the oil filter and radiator in time to ensure smooth oil flow, good heat dissipation and avoid engine overload.

6，防止剎車失靈：剎車液在高溫環境下更容易蒸發汽化，在剎車油管中形成空氣阻力，剎車蹄也容易燒蝕，導致剎車失靈。因此，有必要經常檢查和調整制動系統。在長斜坡上，應注意停車制動器，以確保良好的制動性能。如果發現制動輪轂很熱，請停止并冷卻。

6. Prevent brake failure: the brake fluid is more likely to evaporate in high temperature environment, forming air resistance in the brake oil pipe, and the brake shoes are also easy to be ablated, leading to brake failure. Therefore, it is necessary to check and adjust the brake system frequently. On long slopes, attention should be paid to the parking brake to ensure good braking performance. If the brake hub is found to be hot, stop and cool.

只有這樣，才能保證設備在正常運行中的良好性能，延長設備的使用壽命。我希望每個人都可以遵循它。掌握這些知識后，合理使用設備。

Only in this way can we ensure the good performance of the equipment in normal operation and extend the service life of the equipment. I hope everyone can follow it. After mastering these knowledge, use the equipment reasonably.