Automatic feeding mixer is a special heavy truck, with high load, complex road conditions and large inertial centrifugal force in the tank mixing process, which brings heavy burden to the braking system of the mixing system. Although the braking system is very important to the mixer system, the braking distance and thermal degradation of the brake should be considered first when determining the safety of the mixer.

如果自動上料攪拌車的制動系統出現問題，駕駛員和乘客也有危險。因此，在駕駛或踩踏制動器時，請務必小心制動器。

If there is a problem with the brake system of the automatic feeding mixer, the driver and passengers are also at risk. Therefore, when driving or pressing the brake, please be careful of the brake.

1.制動時發出異常聲音

1. Abnormal sound when braking

踩剎車時，剎車系統會產生強烈的金屬摩擦。這可能是由于剎車片上的異物或剎車盤上的銹蝕所致。

When you step on the brake, the brake system will produce strong metal friction. This may be due to foreign matter on the brake pads or rust on the brake discs.

2，剎車踏板行程會更長

2. The brake pedal travel will be longer

制動器柔軟時，可以看到白色斑點。較長的制動行程的原因主要是由于空氣侵入制動系統，缺少制動油，可能的泄漏以及制動襯塊的嚴重磨損。

White spots can be seen when the brake is soft. The reason for the longer brake stroke is mainly due to air intrusion into the brake system, lack of brake oil, possible leakage and serious wear of brake pads.

3，剎車偏

3. The brake is biased

制動器偏離現象不是很普遍，主要反映了在施加制動器時手柄偏向一側的事實。造成這種現象的原因是制動襯塊偏心磨損和制動缸問題。

The phenomenon of brake deviation is not very common, which mainly reflects the fact that the handle is biased to one side when the brake is applied. The causes of this phenomenon are eccentric wear of brake pad and brake cylinder.

4，剎車變得越來越困難

4. Braking becomes more and more difficult

許多攪拌車具有增強的制動問題。加強制動器的主要原因是真空助力器損壞。制動器不輔助，經常使用。

Many mixers have enhanced braking problems. The main reason for strengthening the brake is that the vacuum booster is damaged. The brake is not auxiliary and is often used.

5，剎車回彈

5. Brake rebound

有許多自動上料攪拌車伙伴遇到這種情況，但是在應用制動時，主要是由于制動盤表面的不規則性，上肢彈回了制動踏板。墊子和鋼圈變形。

There are many automatic feeding mixer partners encounter this situation, but in the application of braking, it is mainly due to the irregularity of the surface of the brake disc, and the upper limb bounces back to the brake pedal. The cushion and steel ring are deformed.

自動上料攪拌車的制動器運行異常了解就是這些，你明白了嗎？自動上料攪拌

The brake of automatic feeding mixer runs abnormally. That's all I know. Do you understand? Automatic feeding and mixing