There is a reducer on the side of the wheel of the self feeding mixer. This is the final stage of the powertrain deceleration and twisting device. Let's talk about the working principle of the reducer.

輪減速器采用輪減速器以相同的總傳動比來減小變速器，驅動軸，主驅動器，差速器和半軸上的負載，減小尺寸并實現驅動軸。較大的離地間隙的優點廣泛用于卡車，重型攪拌車，越野車和其他大型工業和采礦車輛。因此，車輪減速器的研究具有重要的現實意義和企業實用性。

The wheel reducer adopts the wheel reducer to reduce the load on the transmission, drive shaft, main driver, differential and half shaft with the same total transmission ratio, so as to reduce the size and realize the drive shaft. The advantages of large ground clearance are widely used in trucks, heavy mixers, off-road vehicles and other large industrial and mining vehicles. Therefore, the research of wheel reducer has important practical significance and enterprise practicability.

當前使用的輪減速器是一組齒輪變速器，其減速并增加扭矩以滿足整個變速器系統的需求。附在調音臺的輸出端子上，以減輕變速箱的負載。車輪減速器用于提高自動裝載混合機的驅動力，以匹配或修改整個傳動系統的驅動力匹配。

The current wheel reducer is a set of gear transmission, which decelerates and increases the torque to meet the requirements of the whole transmission system. It is attached to the output terminal of the mixer to reduce the load of the gearbox. The wheel reducer is used to improve the driving force of the automatic loader mixer to match or modify the driving force matching of the whole transmission system.

發動機點火裝置通過離合器，變速箱和分動箱將動力傳遞至前橋和后橋的最終傳動裝置，并將動力從最終傳動裝置的輸出傳遞至車輪減速器和車輪，以驅動混凝土攪拌機。在該過程中，車輪減速器的工作原理是通過減速增加扭矩和最終驅動傳遞的扭矩，然后將其傳遞到車輪。這使車輪在附著于地面時受到更大的沖擊。驅動力。

The engine ignition device transmits the power to the final drives of the front and rear axles through the clutch, gearbox and transfer case, and transmits the power from the output of the final drives to the wheel reducers and wheels to drive the concrete mixer. In this process, the working principle of the wheel reducer is to increase the torque and the torque transmitted by the final drive through deceleration, and then transmit it to the wheel. This makes the wheels more impacted when they are attached to the ground. drive.

以上就是小編所講解的內容，希望可以幫助到您，如有其他疑問可以直接：http://kitchinit.com，會有在線客服進行解答。

The above is what Xiaobian explained. I hope it can help you. If you have any questions, you can directly: http://kitchinit.com , there will be online customer service to answer.