Since the charging mixer cannot be equipped with a material level machine in the silo, it basically has time control to avoid problems such as adding more materials at one time and causing operation blockage. Since the time limit can be set, how should it be set? Let's briefly understand:

如何設置時間參數，上下料時間設置其實很簡單，在初次使用時，先設置一個小的時候，然后根據每次吸料位置慢慢加，當達到料位達到吸料口的時間，再減去一秒就是合理時間。

How to set the time parameter? The setting of loading and unloading time is actually very simple. In the first use, set an hour first, and then slowly add it according to each suction position. When the material level reaches the suction port, subtract one second to be a reasonable time.

自上料攪拌車

Self loading mixer

有時候我們會使用手動料槍吸料，為了方便操作直接將料槍插入物料桶或者噸袋中，料槍吸料口被嚴實的物料壓縮，強大的負壓將滿滿的物料拉走，這對上料機傷害非常大，且極易堵塞管道。正確的方式是物料在吸料口和空氣形成一定的氣物混合比，在氣流的推動下均勻流入上料機。這個時候我們需要將料槍設計帶有補氣功能。如果物料積壓時間過長可能很硬，這個時候需要在料槍上裝一個振蕩器，敲碎結塊的物料。

Sometimes we use the manual material gun to suck the material. In order to facilitate the operation, we directly insert the material gun into the material barrel or ton bag. The material suction port of the material gun is compressed by the tight material, and the strong negative pressure pulls the full material away, which is very harmful to the feeder and is very easy to block the pipeline. The correct way is that the material forms a certain gas-material mixing ratio with the air at the suction port, and flows evenly into the feeder under the push of the air flow. At this time, we need to design the material gun with air replenishment function. If the material backlog is too long, it may be hard. At this time, an oscillator needs to be installed on the material gun to break the caked materials.

早期本公司主要生產輪式裝載機、小型鏟車等工程機械。隨著產品不斷的改進和市場的需求，我們利用自己多年的工程機械制造經驗研發出這款自上料攪拌機，有需要?dú)g迎來本廠選購。

In the early days, the company mainly produced wheel loaders, small forklifts and other construction machinery. With the continuous improvement of products and market demand, we have developed this self feeding mixer by using our many years of engineering machinery manufacturing experience. Welcome to our factory if necessary.