1. Friction coefficient of automatic feeding mixer

摩擦系數是摩擦材料的基本參數，決定了基本制動的制動力矩。標準要求制造商指定包裝上的摩擦系數。摩擦系數要合適，太高會導致車輪的死亡情況，方向失控和燃燒膜的問題，過低的剎車距離不能太長。

Friction coefficient is the basic parameter of friction material, which determines the braking torque of basic braking. The standard requires the manufacturer to specify the coefficient of friction on the package. The friction coefficient should be appropriate. If it is too high, it will lead to wheel death, out of control direction and combustion film. If it is too low, the braking distance should not be too long.

2.舒適的舒適

2. Comfortable

摘要自動上料攪拌車的舒適性能直接反映在汽車的制動感覺、噪音、灰塵、煙、煙、氣味等方面，隨著私家車的增加和人們生活水平的提高，舒適性在滿足安全的基本前提下成為摩擦膜的重要指標。

The comfort performance of automatic loading mixer truck is directly reflected in the braking feeling, noise, dust, smoke, smoke and smell of the car. With the increase of private cars and the improvement of people's living standards, comfort has become an important indicator of friction film on the premise of meeting the basic safety.

3.可靠的安全

3. Reliable safety

當制動時，小的攪拌車瞬時產生的，特別是在高速或緊急情況下。在高溫時，當摩擦板摩擦系數減小，叫做熱衰減。熱衰減決定了高溫狀態和緊急情況下的安全性。

When braking, a small mixer truck is generated instantaneously, especially at high speed or in emergency. At high temperature, when the friction coefficient of the friction plate decreases, it is called heat attenuation. Thermal attenuation determines the safety in high temperature and emergency situations.

4.自動上料攪拌車的合理使用壽命

4. Reasonable service life of automatic feeding mixer

預期壽命是指一個很重要的產品指標。剎車墊一般情況下是要保證3萬公里的使用壽命。剎車墊中使用的石墨和黃銅的大顆粒也可以減少剎車盤的磨損。

Life expectancy is a very important product index. Generally, the service life of the brake pad is 30000 km. The large particles of graphite and brass used in the brake pad can also reduce the wear of the brake disc.

自動上料攪拌車在正常行駛的過程中，不同情況需要使用的剎車方式也會不一樣。因此沃特機械提醒您在操作使用設備之前適當?shù)牧私鈱W(xué)習一些關于攪拌車的剎車技巧還是非常有必要的，能夠很好的保證我們?cè)谑褂密囕v過程中的安全性。

During the normal driving of the automatic loading mixer, the braking methods required under different conditions will be different. Therefore, water machinery reminds you that it is very necessary to properly understand and learn some braking skills about the mixer before operating and using the equipment, which can well ensure our safety in the process of using the vehicle.

自動上料攪拌車的日常保養：

Daily maintenance of automatic feeding mixer:

攪拌車需維修或檢查時，需在明顯位置掛有“正在檢修”標志牌。拔掉開關鑰匙，拉佳腳剎;排除攪拌車底部故障時，要有結實的支撐設施，車輪前后用木楔挨眼，防止移動、溜滑;兩人以上同時操作，要指訂一人指揮，沒有指揮者的指令，不得擅自著車;機器部件螺絲需緊固時，需使用開口搬腳，避免滑方造成事故。

When the mixer truck needs to be repaired or inspected, a "under repair" sign shall be hung at an obvious position. Pull out the switch key and pull the foot brake; When troubleshooting the bottom of the mixer truck, solid support facilities shall be provided, and the front and rear wheels shall be close to each other with wooden wedges to prevent movement and sliding; When two or more persons operate at the same time, one person shall be appointed to command. Without the command of the commander, they shall not get on the vehicle without authorization; When the screws of machine parts need to be tightened, open feet shall be used to avoid accidents caused by sliding.

以上就是小編整理的關于自動上料攪拌車的剎車技巧問題，希望您能個更好保養使用。

The above is about the braking skills of automatic feeding mixer truck compiled by Xiaobian. I hope you can have better maintenance and use.