概述：為了提高自動攪拌車制動系統的可靠性，系統對以下5部分進行升級：In order to improve the reliability of the automatic agitato
為了提高自動攪拌車制動系統的可靠性，系統對以下5部分進行升級：
In order to improve the reliability of the automatic agitator braking system, the following five parts are upgraded:
(1)自動上料攪拌車制動氣壓管由單管改為雙管，提高了安全系數。
(1) The brake pressure tube of automatic feeding agitator is changed from single tube to double tube, which improves the safety factor.
(2)增加空氣壓縮機與組合閥的鐵管長度，采用多個 U形布置，以提高輸出空氣的冷卻效果，裝載機減輕組合閥門橡膠密封的老化。
(2) Increase the length of the iron pipe of the air compressor and the combined valve, and adopt a plurality of U-shaped layout to improve the cooling effect of the output air, and the loader to reduce the aging of the rubber seal of the combined valve.
(3)將目前使用的組合閥更換為帶干燥器的調壓器，并將其更換為自動上料攪拌車損壞后的維修策略。
(3) Replace the current combined valve with the regulator with dryer, and replace it with the maintenance strategy after the damage of the automatic feeding mixer.
(4)自動上料拌和車在氣頂油制動系統中，加力器是一個非常關鍵的部件，其儲液罐要加一個報警裝置。可采用以下兩種結構：采用液位報警器，利用浮體和舌簧開關檢測制動液液面高度，并及時報警；采用行程報警，如果加力器活塞行程過大，說明制動系統有故障。
(4) In the gas top oil braking system of automatic feeding and mixing vehicle, the afterburner is a very key component, and an alarm device should be added to the liquid storage tank. The following two structures can be used: liquid level alarm, using floating body and tongue spring switch to detect the brake fluid level height, and timely alarm; Using stroke alarm, if the piston stroke of the afterburner is too large, it indicates that the braking system is faulty.
(5)將目前使用的
自動攪拌車組合閥更換為帶干燥器的調壓器，以減少儲氣罐的積水。
(5) Replace the combined valve of the current automatic mixer truck with the regulator with dryer to reduce the water in the gas storage tank.
(2) Increase the length of the iron pipe of the air compressor and the combined valve, and adopt a plurality of U-shaped layout to improve the cooling effect of the output air, and the loader to reduce the aging of the rubber seal of the combined valve.
(3) Replace the current combined valve with the regulator with dryer, and replace it with the maintenance strategy after the damage of the automatic feeding mixer.
(4) In the gas top oil braking system of automatic feeding and mixing vehicle, the afterburner is a very key component, and an alarm device should be added to the liquid storage tank. The following two structures can be used: liquid level alarm, using floating body and tongue spring switch to detect the brake fluid level height, and timely alarm; Using stroke alarm, if the piston stroke of the afterburner is too large, it indicates that the braking system is faulty.
(5) Replace the combined valve of the current automatic mixer truck with the regulator with dryer to reduce the water in the gas storage tank.
點擊撥打服務熱線：400-879-1999
