自動上料攪拌車是一種用于工程的大型設備，所以操作人員的安全是要重點關注的一方面，當然要保障人身安全，首先要做的事情便是在用車前對設備各部件進行一個檢查，以免有什么問題在使用中出現。

　　Automatic feeding mixer is a kind of large equipment for engineering, so the safety of the operator is the one to focus on, of course, to protect personal safety, the first thing to do is to check each part of the equipment before the car, so as not to have any problems in use.

　　做好安全措施，防止裝料的攪拌車壞在路上。啟動自上料攪拌車前，要先檢查機油、潤滑油和冷卻水等物料是否充足，及時進行添加。車子啟動后，低速旋轉罐體，繞車一周檢測胎壓，防止有漏氣車胎，用工具拿掉卡在輪胎中石子等雜物。

　　Take safety measures to prevent the mixing truck from breaking down on the road. Before starting the mixing vehicle, check whether the oil, lubricating oil and cooling water are sufficient and add them in time. After the car starts, rotate the tank at low speed, detect tire pressure around the car, prevent a leaky tire, remove the stone and other debris stuck in the tire with tools.

　　其次檢驗燈光是否正常，務必保證照著輪胎邊緣，防止被工地堆放的鋼筋雜物割傷。清理干凈后視鏡和窗戶玻璃，司機保持清晰開闊視野，以應對工地的復雜工況場景。

　　Next check whether the light is normal, be sure to ensure that according to the tire edge, to prevent the site stacked steel debris cut. Clean the rearview mirror and window glass, and the driver keeps a clear and open vision to cope with the complex working scene of the construction site.

　　準備足夠的水和減水劑。水可以應對混凝土物料干燥無法卸料的情況，減水劑也是同理，防止悶罐。啟動攪拌車時確保攪拌罐處于靜止?fàn)顟B(tài)。發動機啟動時罐子如果處于高速旋轉狀態，瞬間的力會非常大，容易使減速機磨損，降低使用壽命。

　　Prepare plenty of water and water reducing agent. Water can cope with the dry concrete material can not discharge the situation, water-reducing agent is the same, to prevent stuffy pot. Make sure the tank is stationary when starting the mixer. If the tank is in a high-speed rotation state when the engine starts, the instantaneous force will be very large, which is easy to wear the reducer and reduce the service life.

　　另外，自動上料攪拌車一般露天停放，裝料前先將罐里的積水和樹葉之類的雜物排出，以免影響混凝土質量。裝完料要記得沖洗進料斗，洗完后要關掉水箱進氣口，打開水箱排氣口排掉氣體，因為氣壓下，水管連接不好的地方，容易滲水，影響其他車輛的安全。再次檢查輪胎是否卡有石子鐵釘?shù)入s物，使用工具及時清理，因為停車時輪胎與地面接觸的地方是檢查不到的。

　　In addition, the automatic feeding mixer is generally parked in the open air, and the water and leaves in the tank will be discharged before loading, so as not to affect the quality of concrete. After loading the material, remember to wash the hopper. After washing, turn off the water tank inlet and open the exhaust port of the water tank to drain the gas, because under the pressure, the water pipe connection is not good, easy water seepage, affecting the safety of other vehicles. Check again whether the tire is stuck with stones, nails and other sundries, use tools to clean up in time, because the parking tire and the ground contact place is not checked.

　　總之，要想安全的運行自動上料攪拌車，就需要操作人員做好檢查工作，尤其是檢查設備各部件是否正常，當確認設備各部均屬完好時，方可起動設備進行工作。更多設備相關內容就來網站http://kitchinit.com看看吧。

　　In short, in order to run the automatic feeding mixer safely, it is necessary for the operator to do a good job of checking the work, especially to check whether the parts of the equipment are normal. When confirming that all parts of the equipment are in good condition, the equipment can be started to work. For more information about devices, visit http://kitchinit.com.