攪拌車的生產需要正確的底盤和正確的頂部才能完成。底盤來自底盤品牌制造商，然后在攪拌車改裝廠進行改裝。今天，我們將普及攪拌車的改裝知識，尤其是改裝后的攪拌車需要符合幾點要求。

The production of mixer truck requires correct chassis and correct top. The chassis comes from the chassis brand manufacturer, and then is modified in the mixer truck modification plant. Today, we will popularize the modification knowledge of the mixer truck, especially the requirements that the modified mixer truck needs to meet.

自動攪拌車改造部分應留有足夠的維修空間，特別是潤滑點、緊固螺栓、電池和制動部件的操作空間。

Sufficient maintenance space shall be reserved for the reconstruction part of the automatic mixer, especially the operation space for lubrication points, fastening bolts, batteries and braking components.

允許改變發動車的冷卻系統，但不能妨礙進氣和排氣。

It is allowed to change the cooling system of the engine, but the air intake and exhaust shall not be obstructed.

安裝改裝件時，總成及各部件必須保證通過安全、操作安全、可靠、功能齊全、維修方便。

When installing the modified parts, the assembly and all components must ensure safe passage, safe and reliable operation, complete functions and convenient maintenance.

當改裝件伸出駕駛室上方時，駕駛室應能自由翻轉。

When the refitted parts protrude above the cab, the cab shall be able to turn freely.

改造后的攪拌車的驅動、制動和轉向性能不受影響。

The driving, braking and steering performance of the modified mixer truck will not be affected.

改造后的攪拌車外形尺寸不得超過限值，后懸掛不得超過標準限值。

The overall dimension of the reconstructed mixer truck shall not exceed the limit value, and the rear suspension shall not exceed the standard limit value.

此外改裝前要符合一定的安全和監管限制要求，比如：攪拌車改裝后的總質量不得超過大允許總質量，各軸軸重質量不得超過大允許軸重質量。重心應盡可能低，但必須有足夠的空間來容納車輪彈跳高度。改裝后的攪拌車應保證維修方便。

In addition, before refitting, certain safety and regulatory restrictions shall be met. For example, the total mass of the refitted mixer shall not exceed the maximum allowable total mass, and the axle weight of each axle shall not exceed the maximum allowable axle weight. The center of gravity should be as low as possible, but there must be enough space to accommodate the wheel bounce height. The modified mixer truck shall ensure convenient maintenance.

不得隨意改變攪拌車軸距。對于加長、縮短車架縱梁、改變橫梁位置等特殊情況，必須咨詢底盤部技術人員，避免改裝出現質量問題。改造后的自動攪拌車必須符合國家現行法律法規的要求。

Do not change the wheelbase of the mixer at will. For special cases such as lengthening, shortening the longitudinal beam of the frame and changing the position of the transverse beam, the technical personnel of the chassis department must be consulted to avoid quality problems in the modification. The reformed automatic mixer truck must meet the requirements of current national laws and regulations.

希望以上所講可以幫助到您，更多相關的信息您可以來關注我們網站http://kitchinit.com，聯系專業客服人員，為您講解更多更為詳細的內容或者問題，讓您在此有所獲??！

I hope the above can help you. For more relevant information, you can follow our website http://kitchinit.com , contact the professional customer service personnel to explain more and more detailed contents or questions for you, so that you can get some information here!