一般來說，自動上料攪拌車在維護保養得當?shù)那疤嵯率褂脡勖^長，影響因素較多。比如自動上料攪拌車的漆面如果長時間不進行處理，會造成不同程度的氧化和損壞，因此養護就非常重要。我們需要保持什么樣的漆面？現在讓我們看看。

Generally speaking, the automatic feeding mixer has a long service life and many influencing factors on the premise of proper maintenance. For example, if the paint surface of the automatic feeding mixer is not treated for a long time, it will cause oxidation and damage to varying degrees. Therefore, maintenance is very important. What kind of paint do we need to maintain? Now let's see.

攪拌車的金屬涂層出現十分細的裂紋，而且裂紋繼續浸透涂層，直到其浸透到整個涂層為止。假如裂紋中包含蠟，則身體上會出現條紋。定期打蠟?zāi)軌蛑鸩綔p少裂紋。

Very fine cracks appear in the metal coating of the mixer truck, and the cracks continue to penetrate the coating until they penetrate the entire coating. If the cracks contain wax, streaks will appear on the body. Regular waxing can gradually reduce cracks.

攪拌車在露出于陽光的紫外線下會蒸發并維護空氣中的油，隨著時刻的消逝，涂料會過度渙散。油漆外表的亮度和深度大大下降，油漆外表逐步變白，構成氧化層，縮短了油漆壽數。假如自動上料攪拌車的油漆外表被嚴峻氧化，則能夠經過研磨和拋光對其進行處理。

The mixer will evaporate and maintain the oil in the air under the ultraviolet light exposed to the sun. With the passage of time, the paint will be excessively lax. The brightness and depth of the paint surface are greatly reduced, and the paint surface gradually turns white, forming an oxide layer, shortening the paint life. If the paint surface of the automatic feeding mixer is severely oxidized, it can be treated by grinding and polishing.

長時間的風吹雨打，自動上料攪拌車在使用中，不可避免地會出現車身劃傷或油漆脫落的問題。油漆破損面積雖小，但在長期室外工作空氣的氧化作用下，破損部位會生銹。如果忽視，長期氧化會使油罐車美觀，降低油罐車的使用壽命。

During the long-term wind and rain, the automatic feeding mixer truck will inevitably be scratched or the paint will fall off. Although the damaged area of the paint is small, the damaged part will rust under the oxidation of long-term outdoor working air. If ignored, long-term oxidation will make the oil tank truck beautiful and reduce its service life.

攪拌車在行駛過程中由于摩擦產生強靜電層，對粉塵、油類和化學粉塵有較強的吸附能力。過了很長一段時間，就會形成硬交通片。這種“交通膜”容易在漆面上造成氧化腐蝕，可以通過打磨拋光。

A strong electrostatic layer is generated due to friction during the driving of the mixer, which has a strong adsorption capacity for dust, oil and chemical dust. After a long time, a hard traffic film will be formed. This "traffic film" is easy to cause oxidation corrosion on the paint surface, which can be polished by grinding.

水痕是水滴蒸發后留下的痕跡，呈環狀。氧化，常用清潔劑清洗汽車容易沾有水漬。輕微的水漬可以通過打蠟和拋光來治愈。在嚴重情況下，需要打磨或涂漆。由于摩擦和日常護理不當，自動上料攪拌車油漆表面有輕微劃痕，但底漆未外露。這種劃痕在陽光下很明顯，一般用專業的拋光方法去除。

The water mark is the mark left by the evaporation of water drops, which is circular. Oxidation, the car is easy to get water stains after cleaning with common detergent. Slight water stains can be cured by waxing and polishing. In severe cases, grinding or painting is required. Due to improper friction and daily care, there are slight scratches on the paint surface of the automatic feeding mixer, but the primer is not exposed. This kind of scratch is obvious in the sun and is usually removed by professional polishing methods.

以上就是今天為大家分享的關于問題的相關內容，希望對大家能有所幫助，想要了解更多內容可以電話聯系我們或者關注我們的網站http://kitchinit.com。

The above is the relevant content about the problem shared for you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://kitchinit.com 。