RM新时代入口

歡迎來到中科聚峰機械有限公司!

24小時服務熱線:

400-879-1999

點擊撥打服務熱線:400-879-1999
當前位置:首頁>新聞中心>常見問題減少攪拌車輪胎磨損就要關注什么事項

減少攪拌車輪胎磨損就要關注什么事項

來源:http://kitchinit.com/ 日期:2022-07-08 發布人:admin
概述:一個攪拌車輪胎價值數千元,如果使用不當導致非正常損耗,對攪拌車車主的資金可是不小的打擊!那么減少攪拌車輪胎磨損就要關注什么事項?為
一個攪拌車輪胎價值數千元,如果使用不當導致非正常損耗,對攪拌車車主的資金可是不小的打擊!那么減少攪拌車輪胎磨損就要關注什么事項?為此,小編總結幾個減少攪拌車輪胎磨損小竅門,僅供參考。
A mixer tire is worth thousands of yuan. If it is improperly used, it will cause abnormal losses, which will be a great blow to the capital of the mixer owner! So what should we pay attention to to to reduce the wear of mixer tires? To this end, the editor summarizes several tips to reduce the wear of mixer tires for reference only.
關注胎面缺陷
Pay attention to tread defects
定時檢查攪拌車輪胎表面有無裂紋、變形等缺陷。攪拌車輪胎的花紋溝由于行駛磨損而逐漸變淺,如果磨平就會失去排水防滑等作用,攪拌車各項性能將大大降低,而看似細小的裂紋更是高速行駛時爆胎的隱患。此外還要注意及時清除凹槽中的小石子。
Regularly check whether there are cracks, deformation and other defects on the tire surface of the mixer truck. The tread groove of the mixer tire will gradually become shallow due to driving wear. If it is ground flat, it will lose the function of drainage and skid resistance, and the performance of the mixer will be greatly reduced. The seemingly small cracks are the hidden danger of tire burst when driving at high speed. In addition, pay attention to the timely removal of small stones in the groove.
關注停車事項
Pay attention to parking matters
避免將攪拌車停放在有粗大、尖銳或鋒利石子的路面上。攪拌車不要停放在靠近或接觸有酸類物質及其他影響橡膠變質的物料的地方。攪拌車駕駛員不要在停車后轉動方向盤,這樣的操作會加速攪拌車輪胎的磨損。
Avoid parking the mixer on the road with coarse, sharp or sharp stones. Do not park the mixer near or in contact with acids and other materials that affect the deterioration of rubber. The mixer driver should not turn the steering wheel after parking. Such operation will accelerate the wear of the mixer tires.
自動攪拌車
關注耐磨度
Pay attention to wear resistance
多數人不知道,其實耐磨度是攪拌車輪胎的一項基本指標,不同于它的尺寸、承重以及速度級別的地方在于,耐磨指數并沒有被標識于輪胎的胎肩,也許是因?yàn)槟湍ブ笖?shù)并不像以上其他指標那樣會直接影響到安裝,或是對安全造成直接威脅。但有心的車主不妨上網或是通過其他一些途徑了解攪拌車輪胎的耐磨指數這項指標,對于你挑選一款經久耐用的攪拌車輪胎應能起到參考的作用。
Most people don't know that, in fact, wear resistance is a basic indicator of the mixer tire. What's different from its size, load-bearing and speed level is that the wear index is not marked on the shoulder of the tire, perhaps because the wear index will not directly affect the installation or pose a direct threat to safety like the other indicators above. However, interested car owners may wish to know the wear index of mixer tires online or through some other ways, which should be a reference for you to choose a durable mixer tire.
關注路面情況
Pay attention to the road conditions
在公路維修施工地段行車時,應用低速緩行選擇路面的辦法通過,避免自動攪拌車輪胎受到過度碰擊,甚至被刺傷或劃傷;在凹凸不平的道路上行車,一要選擇路面,減輕攪拌車輪胎與路面的碰擊,避免機件及輪胎的損壞;二要減速緩行,避免攪拌車輪胎顛簸和強烈震動;通過泥濘地段,應選擇較堅實、不滑的地方通過,以免輪胎下陷、原地空轉、劇烈生熱造成攪拌車輪胎及胎側嚴重割傷、劃傷。
When driving in the road maintenance and construction section, the method of choosing the road surface at a low speed should be adopted to avoid the automatic mixer tire from being excessively bumped, or even stabbed or scratched; When driving on uneven roads, first, choose the road surface to reduce the collision between the mixer tire and the road surface and avoid the damage of machine parts and tires; Second, slow down and avoid the bumps and strong vibrations of the mixer tires; When passing through muddy areas, a solid and non slippery place should be selected to avoid serious cuts and scratches on the tire and sidewall of the mixer caused by tire subsidence, idling in place and severe heat generation.
此外攪拌車駕駛方法與輪胎磨損有很大關系。良好、熟練的駕駛技術能有效地減少攪拌車輪胎的磨損,延長攪拌車輪胎的使用壽命,同時提高行駛安全性。如對這一問題還存在任何疑問,都?xì)g迎關注我們網站http://kitchinit.com并咨詢我們的工作人員,將竭誠為您服務。
In addition, the driving method of mixer truck has a great relationship with tire wear. Good and skilled driving skills can effectively reduce the wear of mixer tires, prolong the service life of mixer tires, and improve driving safety. If you still have any questions about this issue, you are welcome to follow our website http://kitchinit.com And consult our staff, will serve you wholeheartedly.

截屏,微信識別二維碼

RM新时代入口