自動攪拌車運輸建筑材料時，需要進行日常的維護保養，盡量保護好攪拌車的各個部件，這樣在使用過程中就不會出現問題。接下來小編就告訴大家如何保養車燈。

When the automatic mixer transports building materials, it needs to carry out daily maintenance, and try to protect all parts of the mixer, so that there will be no problems in the process of use. Next, Xiaobian will tell you how to maintain the lights.

1、要合理認識車燈的不同功能，對攪拌車的燈進行全面保養。車燈主要包括轉向燈、牌照燈、示寬燈、停車燈、倒車燈和剎車燈。燈。

1. It is necessary to reasonably understand the different functions of the lights and carry out comprehensive maintenance on the lights of the mixer truck. Lamps mainly include turn signal lamps, license plate lamps, side marker lamps, parking lamps, reversing lamps and brake lamps. Lights.

2、對燈的特殊位置進行特殊保護，自動攪拌車應使用霧燈作為標準設備或流行的選裝件。損壞，因此出現裂縫時需要及時更換。

2. The special position of the lamp shall be specially protected, and the automatic mixer shall use the fog lamp as a standard equipment or a popular option. It is damaged, so it needs to be replaced in time when cracks appear.

3、燈罩采用特殊材料制成，密封性能好。但是，如果經常摩擦，很容易使透光率變差，導致光線亮度變暗等不良情況。因此，定期擦洗燈罩對燈具的性能有幫助。

3. The lampshade is made of special materials with good sealing performance. However, if it is often rubbed, it is easy to make the light transmittance worse, resulting in poor conditions such as dim light brightness. Therefore, regular scrubbing of the lampshade is helpful to the performance of the lamp.

此外攪拌車年檢時，會檢查光束的位置是否正確。正確的光束位置將使視野更清晰，駕駛更安全。

In addition, during the annual inspection of the mixer truck, it will check whether the position of the beam is correct. The correct beam position will make the vision clearer and the driving safer.

選擇黑暗的環境，如夜間地下停車，將攪拌車車頭靠墻停放，并盡量將車頭與墻壁對齊，相距約5米或6米；

Choose a dark environment, such as underground parking at night, park the front of the mixer against the wall, and try to align the front with the wall, with a distance of about 5 or 6 meters;

打開大燈，用厚厚的不透明布蓋住一個大燈，單獨調整每個大燈。為了保證攪拌機

Turn on the headlights, cover one headlamp with a thick opaque cloth, and adjust each headlamp separately. To ensure that the mixer

用記號筆或粉筆在墻壁的燈光范圍中央標記攪拌車的燈光，并在墻壁上對應車標的位置做一個標記。

Mark the light of the mixer truck in the center of the light range of the wall with a marker or chalk, and make a mark on the wall at the position corresponding to the vehicle logo.

測量攪拌車兩側燈標與中心位置的距離，兩者距離應相等。如出現外偏或內偏現象，應閱讀攪拌車使用說明書，用螺絲刀微調，使兩個燈的位置對稱；

Measure the distance between the lights on both sides of the mixer and the center, and the distance between the two should be equal. In case of external deviation or internal deviation, you should read the operation manual of the mixer truck and fine tune with a screwdriver to make the positions of the two lights symmetrical;

調整梁的高度。右側攪拌車燈應完全水平直射，左側攪拌車燈應向上抬高10cm左右，但不要調得太高，以免燈光直射映在迎面而來的司機的眼睛上。右側燈的照明范圍可以向右移動，以提高右側的能見度。

Adjust the height of the beam. The mixing lamp on the right side should be completely horizontal and direct, and the mixing lamp on the left side should be raised by about 10cm, but do not adjust it too high, so as to avoid direct reflection of the light on the eyes of the oncoming driver. The lighting range of the right side lamp can be moved to the right to improve the visibility of the right side.

以上就是自動攪拌車燈的保養方法。雖然這是一個小問題，但卻是我們經常忽略的問題。我希望你會注意它，更多內容就來關注我們網站http://kitchinit.com獲取到吧。

The above is the maintenance method of automatic mixing lamp. Although this is a small problem, it is a problem we often ignore. I hope you will pay attention to it and pay more attention to our website http://kitchinit.com Get it.