攪拌一體車門的自動加載以及焊接和焊接實際上都粘在密封條上，這也是保證密封的操作。不然，這些縫隙很簡單被外面的風沙沙粒填滿，引起腐蝕等。下面來了解一下攪拌一體車密封條該怎樣保護。

The automatic loading, welding and welding of the mixing integrated door are actually adhered to the sealing strip, which is also the operation to ensure the sealing. Otherwise, these gaps are simply filled by the sand particles outside, causing corrosion, etc. Now let's learn how to protect the sealing strip of the mixer.

檢查攪拌一體車密封是否有大的裂縫和裂縫。如果密封破損，可以用粘合劑修復。特別是，通過使用特殊的粘合劑進行密封，很容易填充大的裂縫帶。當然，如果密封件嚴重?fù)p壞或老化，請更換新密封件。

Check whether there are large cracks and cracks in the seal of the mixer. If the seal is broken, it can be repaired with adhesive. In particular, large crack bands can be easily filled by sealing with a special adhesive. Of course, if the seal is seriously damaged or aging, please replace it with a new one.

用混凝土拌和清潔劑清潔門窗密封條后，驅動程序會施加一層滲透性保護劑，以避免密封條老化，并大大提高密封條的密封功能。除此之外，擋風雨條之間的空隙很簡單充溢塵埃和鐵銹。為此，請使用刷子清除塵埃。

After cleaning the door and window sealing strip with concrete mixing detergent, the driver will apply a layer of permeable protective agent to avoid the aging of the sealing strip and greatly improve the sealing function of the sealing strip. In addition, the gaps between the weather strips are simply filled with dust and rust. To do this, use a brush to remove the dust.

車門與車身的密封是一個比較困難的部位，密封要求比較嚴，應密封的部分比較長，各密封部位的斷面形狀不盡相同，而且車門啟閉頻繁。在攪拌車上常設置3道,4道密封，安裝前支柱及車頂側橫梁部位的四重密封的構造。這種多道密封一般都布置在前門縫里，除具有密封功能外，還有汽車隔音降噪的作用。

The sealing between the door and the vehicle body is a relatively difficult part. The sealing requirements are relatively strict. The part to be sealed is relatively long. The cross-sectional shape of each sealing part is different, and the door is opened and closed frequently. The mixer truck is often provided with three and four seals, and the four seals at the front pillar and roof side beam are installed. This multi-channel seal is generally arranged in the seam of the front door. In addition to the sealing function, it also has the function of automobile sound insulation and noise reduction.

車窗玻璃損壞后，駕駛員應在替換玻璃時查看密封條是否損壞。因?yàn)樾蘩砗蟠皯舫３２荒芸祻?fù)到其原始形狀，因而除了保證能夠簡單地拉動或提起窗戶玻璃外，還需要注意窗戶玻璃周圍的密封。假如玻璃和玻璃容器之間的空隙不均勻，則橡膠條與玻璃和玻璃容器的接觸不良，駕駛員能夠輕松地用手拉動密封圈。

After the window glass is damaged, the driver should check whether the sealing strip is damaged when replacing the glass. Since the repaired window often cannot recover to its original shape, in addition to ensuring that the window glass can be easily pulled or lifted, it is also necessary to pay attention to the sealing around the window glass. If the gap between the glass and the glass container is not uniform, the rubber strip has poor contact with the glass and the glass container, and the driver can easily pull the sealing ring by hand.

司機在換車頂時，應先在車頂周邊壓合處涂一層導電密封膠，待焊好后再在流水槽內及接縫處遍涂折邊膠，這不但有助于車身的密封，更可防止車身因翻邊焊縫處積水而產生早期銹蝕。更多相關事項的了解您可以來我們網站http://kitchinit.com咨詢！

When changing the roof, the driver should first apply a layer of conductive sealant at the press joint around the roof, and then apply the folding adhesive in the gutter and at the joints after welding. This not only helps the sealing of the vehicle body, but also prevents the early corrosion of the vehicle body due to water accumulation at the flanging welds. You can visit our website for more information http://kitchinit.com consulting service