Since the loading mixer in the construction process, in order to improve their own interests, will continue to operate efficiently, assuming that the equipment due to defects and repair, it will increase a lot of costs. And usually in the operation of the mixer from the process of parts wear is more common, so in the use of we should be like this to avoid the occurrence of this situation?

1、堅持自上料攪拌車設備作業的額外載荷

1. Adhere to the additional load of self loading mixer

像這類的混凝土機械設備的載荷性質以及大小對設備零件的損耗都是有著重要影響的，一般機械零件的磨損都是會隨著負荷的增加而增加的，當零件所承受的載荷高于設計的作業載荷時，其部件磨損將會不斷加劇。

The load properties and size of such concrete machinery and equipment have an important impact on the loss of equipment parts. The wear of general mechanical parts will increase with the increase of load. When the load borne by parts is higher than the designed working load, the wear of parts will continue to intensify.

2、及時清潔，削減對機械雜質對設備的影響

2. Timely clean and reduce the impact of mechanical impurities on the equipment

機械雜質一般指的是灰塵、泥土等物質和工程機械在運用過程中自身發生的一些金屬屑、油垢等。這些雜質一旦抵達機械的作業外表之間，其危害是很大的：不但使摩擦力增大，油耗升高。并且會損壞光滑油膜，擦傷協作外表。

Mechanical impurities generally refer to dust, soil and other substances and some metal chips and oil dirt that occur during the operation of construction machinery. Once these impurities reach the working surface of the machine, its harm is very big: not only increase the friction force, fuel consumption. And will damage the smooth oil film, scratch the cooperative surface.

3、預防自上料攪拌車零件腐蝕

3. Prevention of parts corrosion of self feeding mixer

腐蝕作用在零件上，有時不易被發現，簡略被人忽視，危害性更大。雨水、空氣中的化學物質等通過機械零部件的管道、縫隙等滲入機械，腐蝕零件。被腐蝕的零件繼續作業也會使機械加快磨損，增加機械缺點。這就要求管理者和操作人員要根據當時當?shù)氐奶鞖馇闆r、工地現場情況，采納合理的施工安排，盡可能減小化學腐蝕對機械零件的危害。

Corrosion on parts, sometimes not easy to be found, simply ignored, more harmful. Rain water, chemical substances in the air and so on penetrate into the machinery through the pipes and crevices of the mechanical parts and corrode the parts. The continued operation of corroded parts will also accelerate the wear of machinery and increase the mechanical defects. This requires managers and operators to adopt reasonable construction arrangements according to the local weather conditions and site conditions, so as to minimize the harm of chemical corrosion on mechanical parts.

4、堅持自上料攪拌車設備零件的合理溫度

4. Adhere to the reasonable temperature of self feeding mixer parts

在作業中，各個零部件的溫度都有各自的正常規模。溫度過高過低會影響零件的強度，所以需要協作冷卻液和光滑油控制部分零件的溫度，使他們作業在合理溫度規模。

In operation, the temperature of each part has its own normal scale. Too high or too low temperature will affect the strength of parts, so it is necessary to cooperate with coolant and smooth oil to control the temperature of some parts, so that they can work at a reasonable temperature scale.

許多機械設備在缺點開始的時候都是因?yàn)榱慵p引起的，自上料攪拌車在操作工作過程中天然也相同如此。因此，在運用過程中下降對設備零件的磨損，可以有用避免機械設備在運用過程中的缺點發生。

Many mechanical equipment at the beginning of the shortcomings are caused by parts wear, since the feeding mixer in the operation process of the same naturally. Therefore, reducing the wear of equipment parts in the process of application can be useful to avoid the shortcomings of mechanical equipment in the process of application.