The high temperature problem of automatic feeding mixer truck is very harmful. We must pay attention to it. Especially in hot summer, many machines are prone to high temperature problems. How to avoid the high temperature hazard of automatic feeding mixer truck?

自動上料攪拌車

Price of automatic feeding mixer

1、防止發動機機體過熱：由于環境溫度比較高，因此發動機容易過熱，要加強對自動上料攪拌車發動機冷卻系統的檢查、保養，這包括水箱、節溫器、水泵、風扇等部件的檢查，并且要注意及時加注冷卻水。當水溫超過100℃時，應在陰涼處停車降溫，讓發動機怠速運轉，并掀開發動機罩幫助散熱。

1. Prevent overheating of engine body: due to the high ambient temperature, the engine is easy to overheat. It is necessary to strengthen the inspection and maintenance of the engine cooling system of the automatic feeding mixer, including the inspection of water tank, thermostat, water pump, fan and other components, and pay attention to the timely injection of cooling water. When the water temperature exceeds 100 ℃, stop in a cool place to cool down, let the engine idle, and lift the engine hood to help dissipate heat.

2、防止車漆受損：車漆經過強烈的陽光曝曬，會發舊、起皺，而普通的美容打蠟雖然可以起到一定的防曬效果，但由于任何車蠟都含有矽的成分，久經紫外線照射會銹蝕車漆，留下點點黑斑。車蠟本身起不到增強硬度、抗紫外線的作用，反而會因溫度過高而很快流失，自動上料攪拌車停放時要注意盡量把車停放在陰涼處。

2. Prevent damage to the car paint: the car paint will become old and wrinkled after strong sunlight exposure. Although ordinary beauty waxing can play a certain sunscreen effect, because any car wax contains silicon, it will rust the car paint after a long time of ultraviolet radiation, leaving a little black spots. The car wax itself can not enhance the hardness and anti ultraviolet effect, but will quickly lose due to excessive temperature. When parking the automatic feeding mixer, pay attention to parking the car in a cool place as far as possible.

自動上料攪拌車

Price of automatic feeding mixer

3、防止車胎爆裂：氣溫高所以比較容易爆胎，溫度過高時很容易使輪胎變形，抗拉力下降。而作為輪胎本身，氣壓不標準、輪胎老化、性能減弱，或者在行駛過程中輪胎軋到了堅硬的金屬或其他硬物等情況，都會導致汽車突然間爆胎。

3. Prevent tire burst: the temperature is high, so it is easy to burst. When the temperature is too high, it is easy to deform the tire and reduce the tensile force. As for the tire itself, non-standard air pressure, tire aging, performance weakening, or the tire is rolled to hard metal or other hard objects during driving will lead to sudden tire burst.

4、防止剎車制動失靈：制動液在高溫環境中更容易蒸發汽化，在制動管路中形成氣阻，制動蹄片也容易燒蝕，造成制動失靈。所以要經常檢查調整制動系統，下長坡途中應注意停車晾剎，保證制動性能良好。如果發現制動轂發燙，應停車降溫，但不可澆潑冷水，以防制動轂破裂。

4. Prevent brake failure: the brake fluid is easier to evaporate and vaporize in the high temperature environment, forming air resistance in the brake pipeline, and the brake shoes are also easy to be ablated, resulting in brake failure. Therefore, check and adjust the braking system frequently. Pay attention to parking and braking on the way down a long slope to ensure good braking performance. If the brake hub is hot, stop the vehicle to cool down, but do not pour cold water to prevent the brake hub from cracking.

高溫的危害是萬萬不可忽略的，以上幾點大家在使用自動上料攪拌車時一定要注意

The harm of high temperature cannot be ignored. We must pay attention to the above points when using automatic feeding mixer