The quality of the filter system of the mixer is an important issue for everyone. Choosing a good filter element has an irreplaceable impact on production and environmental protection. How can we judge the quality of the filter element? Next, Xiao Bian will tell you.

1，從材料看，材料是認為過濾器好壞的決定性因素，良好的材料具有耐腐蝕，耐壓，阻力小等特點。聚合物纖維等意大利產品的質量非常可靠。

1. From the material point of view, the material is the decisive factor for the quality of the filter. Good material has the characteristics of corrosion resistance, pressure resistance and small resistance. The quality of Italian products such as polymer fibers is very reliable.

2，觀察濾筒端蓋與金屬之間的接觸是否緊密。

2. Observe whether the contact between the end cover of the filter cartridge and the metal is tight.

3，看看攪拌一體車過濾器是否可循環使用，不能用水沖洗，使用壽命大概是多久。

3. See if the filter of the mixer truck can be recycled, and it can't be washed with water. How long is its service life.

4，考慮攪拌一體車的濾芯的精度和滲透性。

4. Consider the accuracy and permeability of the filter element of the mixer truck.

我們通常根據材料的粒徑選擇。對于顆粒較大的材料，我們可以選擇過濾精度較高的過濾器。否則，對于具有較小顆粒或納米級材料的粉末，我們一定選擇高精度過濾器。這樣，可以實現混泥土自動攪拌車的無塵操作，并且可以實現提高產品質量的目的。

We usually choose according to the particle size of the material. For the material with larger particles, we can choose the filter with higher filtering accuracy. Otherwise, for the powder with small particles or nano materials, we must choose high-precision filter. In this way, the dust-free operation of automatic concrete mixer can be realized, and the purpose of improving product quality can be realized.

在設備的實際操作期間，攪拌一體車的轉移也是非常重要的部件。因此，我們需要在使用過程中測試油的質量。那么我們?nèi)绾螌ｉT運作？

During the actual operation of the equipment, the transfer of mixer truck is also a very important part. Therefore, we need to test the quality of oil in use. So how do we specialize?

1.將攪拌車停放在水平表面上并擰緊手制動器。

1. Park the mixer on a horizontal surface and tighten the hand brake.

2.讓發動機空轉幾分鐘。

Let the engine idle for a few minutes.

3.踩下制動踏板，轉動操縱桿使其反轉，前進檔位等，并在每個檔位上停留幾秒鐘，以便用液壓油填充變矩器和所有換檔執行器。將操縱桿轉到停車位置。

3. Step down the brake pedal, turn the control lever to reverse, forward gear, etc., and stay in each gear for a few seconds, so as to fill the torque converter and all shift actuators with hydraulic oil. Turn the lever to the park position.

4.從加注管上取下自動變速器量油尺，將清潔過的量油尺插入加油管并將其拉出以檢查量油尺上的油位。

4. Remove the automatic transmission dipstick from the filler pipe, insert the cleaned dipstick into the filler pipe and pull it out to check the oil level on the dipstick.

在檢查或排除攪拌一體車車故障之前，首先檢查變速箱油位和油質。將換檔桿置于P位置，在怠速時使發動機運轉至少幾分鐘，液體達到正常工作溫度，并且車輛一定停在水平表面上以確保差速器和油門之間的油位。傳輸通常是穩定的。

Before checking or eliminating the faults of the concrete mixer, check the oil level and quality of the gearbox first. Put the shift lever in the P position, run the engine at idle speed for at least a few minutes, the liquid reaches the normal working temperature, and the vehicle must stop on a horizontal surface to ensure the oil level between the differential and the throttle. The transmission is usually stable.

以上對于識別攪拌車質量問題的辦法以及傳動油品質的檢測方法介紹就是這樣了，希望對你有幫助。

The above for the identification of mixer quality problems and transmission oil quality detection method is so, hope to help you.