自動攪拌車的安裝調試是設備使用之前不可少要經過的一個環節，不能夠忽視，不然放過一個問題就會造成設備的使用不順。那么自動攪拌車的安裝調試怎么樣？

　　The installation and debugging of automatic mixing truck is an indispensable link to go through before the use of the equipment. It can not be ignored, otherwise a problem will cause the use of the equipment is not suitable. So how about the installation and debugging of the automatic mixer?

　　自動攪拌車安裝的設計選型與攪拌功課目標嚴密連系，各類分歧的攪拌進程需求由分歧的攪拌安裝運轉來完成，在設計選型時依據工藝對攪拌功課的目標和要求，確定攪拌器型式、電念頭功率、攪拌速度，然后選擇減速機、機架、攪拌軸、軸封等各部件。

　　Car installation design and selection of automatic stirring lesson objectives for connecting and process requirements by the differences of all kinds of differences of stirring operation to complete the installation, when designing the selection according to the process of mixing work goals and requirements, determine the agitator type, thought electric power, stirring speed, and then select the speed reducer, frame, stirring shaft, shaft seal parts, etc.

　　依照工藝前提、攪拌目標和要求，選擇攪拌器型式，選擇攪拌器型式時應充沛掌握攪拌器的動力特征和攪拌器在攪拌進程中所發生的運動形態與各類攪拌目標的因果關系。

　　The agitator type should be selected according to the process premise, mixing objectives and requirements. When selecting the agitator type, the dynamic characteristics of the agitator and the causal relationship between the movement pattern of the agitator in the mixing process and various mixing objectives should be fully grasped.

　　依照所確定的攪拌器型式及攪拌器在攪拌進程中所發生的運動形態，工藝對攪拌夾雜工夫、沉降速度、渙散度的節制要求，經過實行伎倆和核算機模仿設計，確定電念頭功率、攪拌速度、攪拌器直徑。

　　According to the determined stirrer type and stirrer in the process of mixing in the movement of the form, the process of mixing time, sedimentation speed, lax control requirements, after the implementation of tactics and accounting machine imitation design, determine the power of the electric idea, stirring speed, stirrer diameter.

　　依照電念頭功率、攪拌轉速及工藝前提，從減速機選型表中選擇確定減速機機型。假設依照實踐任務扭矩來選擇減速機，則實踐任務扭矩應小于減速機許用扭矩。

　　According to the electric power, stirring speed and process premise, from the reducer selection table to select and determine the reducer model. If the reducer is selected according to the practical task torque, the practical task torque should be less than the allowable torque of the reducer.

　　依照減速機的輸出軸頭d和攪拌軸系支承方法選擇與d一樣型號規格的機架、聯軸器。依照裝置方式和構造要求，設計選擇攪拌軸構造型式，并校檢其強度、剛度。

　　According to the output shaft head D of the reducer and the supporting method of the stirring shafting, choose the frame and coupling of the same model and specifications as D. According to the device and structure requirements, the structure type of mixing shaft is designed and selected, and its strength and stiffness are checked.

　　在以上進程中，自動攪拌車攪拌安裝的組合、裝備可參考，裝備進程中各部件之間銜接樞紐尺寸是軸頭尺寸，軸頭尺寸一致的各部件準則上可交換、組合。

　　In the above process, the combination and equipment of automatic mixer installation can be referred to. The connecting hub size between various parts in the equipment process is the shaft head size, and the parts with the same shaft head size can be exchanged and combined.

　　當我們在進行攪拌機安裝工作的時候，它的調試部分是非常的重要的，要是大家在之前不清楚應該怎樣做的話可以先來網站kitchinit.com進行咨詢，這樣做不容易出差錯！

　　When we are installing the blender, its debugging part is very important. If you are not clear about how to do it before, you can consult the website kitchinit.com first, which is not easy to make mistakes!