相信對于有過多年卡車經驗的老司機來說,車上一些簡單的故障只要動動手指就處理好了。但也有些攪友遇到問題就進場維修也難免遇“坑”,下面小編來講講
攪拌一體車散熱器不轉或轉不停要怎么辦。
I believe that for the old driver who has many years of truck experience, some simple faults on the car can be solved by moving his fingers. However, some agitators will inevitably encounter "pits" when they enter the site for maintenance when they encounter problems. The following editor will talk about what to do if the radiator of the integrated mixer does not rotate or does not stop.
①檢查散熱器保險是否損壞;如果是,則需更換保險絲;
① Check whether the radiator fuse is damaged; If yes, replace the fuse;
②檢查散熱器溫控感應塞是否損壞;如果是,則需更換溫控感應塞;
② Check whether the temperature control sensing plug of radiator is damaged; If yes, replace the temperature control sensing plug;
③檢查散熱器風扇電機是否損壞;如果是,則需更換電機;
③ Check whether the radiator fan motor is damaged; If yes, replace the motor;
④檢查線路是否斷路或虛接,如果是,則需檢查更換線路。
④ Check the circuit for open circuit or virtual connection. If so, check and replace the circuit.
此外還有幾個問題要了解,比如:
In addition, there are several questions to understand, such as:
拖輪異響
Abnormal sound of tugboat
①檢查拖輪的保養(yǎng)情況,檢查拖輪及軌道面是否有雜物;
① Check the maintenance of the tugboat and check whether there are sundries on the tugboat and the track surface;
②檢查拖輪與軌道間是否存在間隙,可調整拖輪與軌道面相關角度;
② Check whether there is a gap between the tugboat and the rail, and adjust the angle between the tugboat and the rail surface;
③查內部軸承是否損壞;
③ Check whether the internal bearing is damaged;
④缺黃油。
④ I'm short of butter.
后操縱手柄重
Rear joystick (heavy)
①拉桿支架缺黃油;
① The tie rod bracket is short of grease;
②連接球頭有無松動。
② Check whether the connecting ball joint is loose.
6、室內控制器手柄操作重
6. Heavy operation of indoor controller handle
①檢查室內控制器拉線是否卡死,角度是否過大;
① Check whether the indoor controller cable is stuck and whether the angle is too large;
②檢查拉線包皮有無磨損;
② Check whether the cable sheath is worn;
③檢查限位螺母是否松動。
③ Check whether the limit nut is loose.
If you have any questions about the mixer, please call us http://kitchinit.com Yes, I will try my best to answer for you.