在投料攪拌過程中，自動攪拌車攪拌主機因電流過大出現悶機跳閘，造成這種情況出現的原因是因為什么呢？我們又該如何解決呢？

In the process of feeding and mixing, the main mixing machine of the automatic mixer truck trips due to the blocking of the machine due to excessive current. What is the reason for this? How can we solve it?

膠帶所受的外力再膠帶寬度方向上的合力不為零或垂直于膠帶寬度方向上的拉應力不均勻而引起的由于導致膠帶跑偏的因素很多，故應從輸送機的設計制造安裝調試使用及維護等方面來著手解決膠帶的跑偏，如膠帶兩側的松緊度不一樣膠帶兩側的高低不一樣托輥支架等裝置沒有安裝與膠帶運行方向的垂直截面上等都會引起皮帶跑偏。

The external force on the belt and the resultant force in the width direction of the belt are not zero or the tensile stress in the direction perpendicular to the width direction of the belt is uneven, which is caused by many factors leading to belt deviation. Therefore, the belt deviation should be solved from the aspects of design, manufacture, installation, commissioning, use and maintenance of the conveyor, If the tightness of the two sides of the belt is different, the height of the two sides of the belt is different. If the idler bracket and other devices are not installed on the vertical section in the running direction of the belt, the belt will deflect.

1.投料過多，引起攪拌機負荷過大

1. Excessive feeding causes excessive load of mixer

2.攪拌系統葉片與襯板之間的間隙過大，攪拌過程中，增加了阻力

2. The gap between the blade and the lining plate of the mixing system is too large, which increases the resistance during the mixing process

3.三角傳動皮帶太松，使傳動系統效率低

3. The triangular drive belt is too loose, which makes the transmission system inefficient

4.攪拌主機上蓋安全檢修開關被振松，引起停機

4. The safety maintenance switch on the upper cover of the mixing machine is loosened, causing shutdown

處理過程：

Handling process:

1.檢查配料系統是否超標和是否二次投料現象

1. Check whether the batching system exceeds the standard and whether there is secondary feeding phenomenon

2.檢查攪拌機葉片與襯板之間的間隙是否在3~8mm

2. Check whether the clearance between the mixer blade and the lining plate is 3~8mm

3.檢查傳動系統三角皮帶的松緊程度并調整檢查主機上蓋安全開關是否松動

3. Check the tightness of the V-belt of the transmission system and adjust it. Check whether the safety switch on the upper cover of the host is loose

自動攪拌車出現悶機跳閘問題的處理相關內容就講解到這里了，您有啥想咨詢的問題或者需求就來我們網站http://kitchinit.com咨詢看看吧！

That's all for dealing with the problem of the trip of the automatic mixer. If you have any questions or needs, please come to our website http://kitchinit.com Consult!