眾所周知,部門自加載混凝土攪拌車在建筑行業有非常重要的作用,它是使用混凝土施工行業提供了極大的便利,但由于加載混凝土攪拌車的質量好與壞,但對很多朋友來說,是片面的,和理解,事實上,一個合格的中科自上料攪拌車,還需要符合以下標準可以認為是合格的。

As we all know, the Department self loading concrete mixer plays a very important role in the construction industry, which provides great convenience for the use of concrete construction industry. However, due to the quality of loading concrete mixer truck is good or bad, it is one-sided and understanding to many friends. In fact, a qualified Zhongke self loading mixer still needs to meet the following standards, which can be considered as qualified.

車外形尺寸應符合國家標準。并根據批準的產品圖紙和技術文件進行制造。購件和外購件應具有生產廠家的產品合格證，并符合相關標準要求，經攪拌車生產廠家檢驗合格后方可裝配。

The overall dimensions of the vehicle shall meet the national standards. And manufacture according to the approved product drawings and technical documents. The purchased parts and purchased parts shall have the product certificate of the manufacturer and meet the requirements of relevant standards, and can be assembled after passing the inspection of the mixer manufacturer.

裝載機的總質量不得超過底盤的許用值，轉向軸(輪)的載重質量及橫搖穩定性角應符合有關規定。焊縫應平整、筆直。無漏焊、裂紋、渣、表面應無毛刺、覆砂現象。所有裸露的黑色金屬表面應進行防銹處理。外觀裝修漆應美觀大方，符合有關規定。

The total mass of the loader shall not exceed the allowable value of the chassis, and the load mass and rolling stability angle of the steering shaft (wheel) shall comply with the relevant provisions. The weld shall be smooth and straight. There shall be no welding leakage, crack, slag, burr and sand covering on the surface. All exposed ferrous metal surfaces shall be rust proof. The exterior decoration paint should be beautiful and in line with relevant regulations.

自上料后，攪拌車的出料速度不小于0.65m3/min，出料殘留率小于2-5%。攪拌車進料速度不小于2.7m3/min。從進料到出料，允許的長時間為90mh，攪拌筒的連續輸送按規定不超過300轉。攪拌車自進料后，速度不得超過50km/h?；旌匣炷涟匆?guī)定的攪拌速度和運輸時間運至交付地點后，其膠結土質量應符合國家標準要求。

After feeding, the discharging speed of the mixer is not less than 0.65m3/min, and the discharge residual rate is less than 2-5%. The feeding speed of mixer truck shall not be less than 2.7m3/min. The allowable long time from feeding to discharging is 90mh, and the continuous conveying of mixing drum shall not exceed 300 revolutions according to regulations. The speed of mixer truck shall not exceed 50km / h after feeding. After the mixed concrete is transported to the delivery place according to the specified mixing speed and transportation time, the quality of cemented soil shall meet the requirements of national standards.

以上就是小編為大家介紹的關于自上料攪拌車符合標準的要求，希望可以幫助到大家，如有不明白的地方可以關注：http://kitchinit.com會有在線客服進行詳細的解答。

The above is about the self loading mixer meeting the standard requirements. I hope it can help you. If you don't understand, you can pay attention to: http://kitchinit.com There will be online customer service for detailed answers.