Automatic feeding mixer after the completion of the operation, how to correctly place, but also we should master a common sense. If the automatic feeding mixer is placed unreasonably, it is likely to cause certain losses, such as forgetting to close the window in summer, wetting the cab of the mixer in a storm, and causing damage to the power supply. How to place the automatic feeding mixer after it stops working, let's learn about it.

1、自動上料攪拌車在停止工作后操作人員將各種手柄置于空擋或中間位置。

1. After the automatic feeding mixer stops working, the operator puts all kinds of handles in neutral or middle position.

2、自動上料攪拌車應停在平地上，并將鏟斗平放地面。當發動機熄火后，需反復多次扳動工作裝置操縱手柄，確保各液壓缸處于無壓休息狀態。當自動上料攪拌車只能停在坡道上時，要將輪胎墊牢。

2. The automatic feeding mixer should stop on the flat ground and lay the bucket flat on the ground. When the engine is off, it is necessary to repeatedly pull the operating handle of the working device to ensure that each hydraulic cylinder is in a non pressure rest state. When the automatic feeding mixer can only stop on the ramp, the tires should be firmly padded.

3、自動上料攪拌車嚴禁停在有明火或高溫地區，以防輪胎受熱爆炸，引起事故。

3. It is strictly forbidden to park the automatic feeding mixer in the area with open fire or high temperature, so as to prevent the tire from explosion due to heating and causing accidents.

4、先取走電鎖鑰匙，然后關閉電源總開關，最后關閉門窗。

4. First take away the key of the electric lock, then turn off the main power switch, and finally close the doors and windows.

自動上料攪拌車在使用過程中應該按照操作規程去操作，同樣，在工作結束后也要按照合理的放置要求去停放，盡量避免因為我們的疏忽而發生故障或者損壞其部件，減少其使用壽命。

The automatic feeding mixer should be operated according to the operation rules in the process of use. Similarly, it should be parked according to the reasonable placement requirements after the work, so as to avoid failure or damage to its parts due to our negligence and reduce its service life.